14

AEM E85 In-Tank Fuel Pump EFI

AEM Introduces E85 In-Tank Fuel Pump for EFI Vehicles

Compatible with E100 Ethanol & M100 Methanol Fuels

 

AEM Performance Electronics has released its E85 Fuel Pump (PN 50-1200) for high performance naturally aspirated and forced induction EFI vehicles. The AEM E85 Fuel Pump flows 320 lph (84 gph) at 43 PSI.* Please refer to the chart below for fuel pump horsepower versus pressure for various applications and fuel types.

 

HP vs Pressure AEM E85 In-Tank Fuel Pump EFI

 

AEM’s E85 Fuel Pump features robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and has been tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. 

 

AEM E85 In-Tank Fuel Pump EFI

 

The AEM E85 Fuel Pump is designed for in-tank mounting and features a compact 39mm diameter that fits most applications. It features an offset inlet design that eases installation and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every 50-1200 AEM E85 Fuel Pump is tested to flow 320 lph at 43 PSI before it is packaged for sale. 

 

Flow curves from 35 to 90 PSI and current draw vs. fuel pressure charts:

fuel pump pressure vs flow chart, AEM E85 In-Tank Fuel Pump EFI

 

AEM E85 Fuel Pump Features (PN 50-1200):

  • Tested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline
  • Designed for high output naturally aspirated and forced induction EFI vehicles
  • In tank design
  • Each pump is tested to flow 320 lph @ 43 PSI
  • 39mm diameter fits most applications
  • Offset inlet design eases installation
  • Kit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead

*Power rating given at 43 PSI, 13.5v at the pump with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities. 

 

 

 

ABOUT AEM
Advanced Engine Management’s performance electronics are Engineered to Outperform. The company designs, manufactures and assembles engine management systems, wideband air/fuel systems, water/methanol injection systems, performance gauges, boost controllers, ignition components, fuel delivery components and adjustable cam gears at its corporate headquarters in Hawthorne, CA. 

 

Bookmark and Share
Comments
There are currently no comments, be the first to post one.
Post Comment Login or register to post a comment.

MotoIQ Proudly Presents Our Partners:

© 2014 MotoIQ.com