Project Cars

Project Miatabusa part 18, Research and Destruction

Project Miatabusa Part 18, Research and Destruction

by Dave Coleman

It has been so long since our last update that you could be forgiven for dismissing Project Miatabusa as dead and forgotten. It is not.

It has, in fact, moved forward in such complex bursts of productivity that there was little time to document it as it happened. And then, frankly, I forgot some of it. What follows is my best recollection of what the hell just happened. 


 

Project V8 RX-7 SSR SP4 Professor Wheels Stoptech trophy brakes toyo r888 tires

Project V8 RX-7: Wheel, Brake and Tire 3 PART MEGAPOST!

Part 3 - The Wheels and Tires Meet the Brakes and Body Kit

by Jeff Naeyaert

In Part 1 of our Wheel, Brake and Tire miniseries, we ordered a set of SSR Professor SP4 wheels for our RX-7 from Tanabe and were patiently enduring the two month wait for them to be built in Japan. During that time we fitted our car with a Stoptech Trophy big brake kit (in Part 2) hoping they would clear the wheels.  Right on schedule our wheels arrived and we were able to pick them up from Tanabe's facility in Torrance!  In Part 3 we’ll finally see how close all our guesses were to being “good enough”!  


 

Project V8 RX-7 Rockebunny RX-7 Stoptech Trophy Big Brake Kit

Project V8 RX-7:  Wheel, Brake and Tire 3 PART MEGAPOST!

Part 2 - Stoptech Big Brake Kit

by Jeff Naeyaert

Ever since our projects, Project FR-S and Project STI got the Stoptech Trophy kit on them and we felt how amazing and confidence inspiring those brakes were, we HAD to have them on the FD.  After all, it IS our flagship project and that nickel finish is just way too bad ass and EXPENSIVE looking!  Stoptech makes a Trophy Big Brake kit for the FD RX-7 and those are the brakes we alluded to in the last article that our wheels needed to clear!


 

RX-7 Toyo R888 335 tires on SSR SP4 wheels

Project V8 RX-7: Wheel, Brake and Tire 3 PART MEGAPOST!

Part 1 - Huge Wheels and Tires from SSR and Toyo Tires

by Jeff Naeyaert

Two installments ago we put the Rocket Bunny wide body kit on our Project V8 RX-7 and if you remember it was looking pretty damn stupid on the stock wheels and tires inboard at least 6 inches on each side.  In Part 1 of this 3-part update we'll be feeding you over the next 3 weeks we get some ridiculously large tires for our FD and try to find some wheels to match!  


 

Project Miatabusa Part 17: EVO II is Finally Here!

by Dave Coleman

If you’re one of the 6 people in the world who isn’t familiar with this car, step back, go HERE, and read every word of the drama (or comedy, or tragedy, we won’t really know until the end) that is Project Miatabusa. For the rest of you who have been waiting to hear what we did about the sackfull of hammers trying to beat their way through the bottom of our car, wait no more:

Step 1: Redesign everything...


 

Project V8 RX-7: Part 15 – Major Suspension Overhaul

by Jeff Naeyaert

A couple of annoying sharp eyes on our last update a few weeks ago revealed that we had some KW suspension bits on our RX-7, so we've been forced to get off our lazy butts and write about them, some SuperPro bushings and a bunch of Improved Racing suspension goodies we put on as well in our attempt to make Project V8 RX-7 not only corner as well as it goes straight, but also remain tolerable and civil for daily driving. 


 

Project V8 RX-7:  Part 14 - Going Wide with Rocket Bunny's new FD3S Widebody Aero Kit

by Jeff Naeyaert

If you follow us on our Instagram or Facebook page (and if you don’t why the F not?  seriously, click up there on the top right of the page and connect!) you know we received one of the first batch of FD RX-7 Rocket Bunny kits to come into the states!  If this seems out of character for us, it is—never in our history have we put a bodykit on one of our project cars—and for good reason, most of them look terrible, are molded poorly and are difficult to install. 


 

Project Miatabusa Part 1: What The Hell Are We Thinking?

by Dave Coleman

Today we bring you a very special Flashback Friday to Part 1 of Project Miatabusa. Why would we do this you ask?  It must be because Part 17 is just around the corner! So for those who aren't familiar with the project here's a chance to start at the beginning.  For those who are already familiar here's a chance to stroll down memory lane and get excited for the next installment.


 

Project Car Update:  The V8 Edition

By Colin Holte

A quick glance at the project car column should tell you that MotoIQ has a large (and ever expanding) roster of project vehicles.  With all these vehicles it can sometimes be tough to keep the updates flowing for each.  In some cases vehicles may have even been sold but we still keep them on the project roll for posterity.  These articles are intended to share a little bit of the details with you of where some of the project vehicles that haven't seen the spotlight in a while are at in their evolution.  In this installment we check in with the V8s:  Project Mustang V8 5.0, Project Tundra, Project V8 RX-7, and Project Lexus IS F.


 

 

Project V8 RX-7: Goin' Legit (Project RX-7 vs the State of California)

by Jeff Naeyaert

Now that it doesn't look like the world is gonna end we need to get our RX-7 smog legal and on the road!  Since the car has been down for surgery with the heart transplant the registration has long since expired. It's only a matter of time before we get busted by the fuzz for old tags and excessive hooning around.  


 

Page 1 of 5First   Previous   [1]  2  3  4  5  Next   Last   

MotoIQ Proudly Presents Our Sponsors:

© 2015 MotoIQ.com