|
|
200SX
Justin Banner posted on December 16, 2011 00:00
Doin' WORK! The Jim Wolf Technology Nissan Valve Tool
By Justin Banner
When working with Nissan Dual Over Head Cam (DOHC) Heads, removing the valve springs and keepers can be quite a challenge. That's where the Jim Wolf Technology Nissan Valve Spring Removal Tool comes into play! How does it work and how much easier does it make working the Nissan DOHC Heads? "Doin' WORK" will show you how!
[Read the rest of this article...]
Posted in: Magazine, Tech, Engine, Project Cars, Nissan, 300ZX, 350Z, 370Z, 200SX, Sentra, Pathfinder, Gadgets, Personal Cars, Street Cars, Drift Cars, Drifting
Justin Banner posted on November 30, 2011 21:57 
Project Defiant1: KA24DE Built Part DEUX! The Devil's Details!
By Justin Banner
Does building a successful engine require thousands of dollars? Not always! Sometimes picking up the throwaway engine is the key to saving on building a great engine! The KA24DE doesn't have the JDM factor, but it does offer more cubic inches, a stouter block, and a powerful aftermarket! Is the garage built KA24DE the key to Defiant1's 350 Crank Horsepower goal? How did I start? Read on to see "the Devil's Details!"
[Read the rest of this article...]
Justin Banner posted on November 21, 2011 20:50
Project Defiant1-KA24DE Build-Part 1
By Justin Banner
To make any car successful, you need a reliable engine. You can't beat the reliability of the Nissan KA, with a Cast Iron block, crank girdle, and connecting rods that don't resemble twigs, you have a recipe for a great engine! Will the KA24E be able to make the 350 Crank Horsepower goal in the 1987 Nissan S12 200SX? NOPE. Read on to find out why!
[Read the rest of this article...]
Sarah Forst posted on August 25, 2011 18:10
by Sarah Forst
Lately I have been searching for information about "water to air intercoolers." I have seen these in some of your articles but not much information is mentioned.
Got a difficult tech question? Email Sarah at asksarah@motoiq.com
[Read the rest of this article...]
Posted in: Magazine, Ask Sarah, Tech, Engine, Chevrolet, Ford, Honda, Infiniti, Mercedes Benz, Mitsubishi, Nissan, Porsche, Subaru, EVO IX, 300ZX, 350Z, 370Z, EVO VIII, 200SX, Sentra, AMG CLK63 Black Series, EVO X, WRX, Impreza, GTR
Eric Hsu posted on August 23, 2011 01:17
by Eric Hsu
Now that the dust has settled from WTAC 2011 itself and the thrashing to prepare in the weeks prior to the event, I'm going to attempt to do an overview of the 10 fastest cars @ WTAC 2011. It seems there was plenty of coverage of the event and the cars on sites, blogs, picture hosting sites, etc. but nowhere could I find a summary of the 10 fastest cars in one place. Looking to build or bring a car to the WTAC 2012 Pro class? Look no further because this is your guide to your competition.
[Read the rest of this article...]
Posted in: Columns, Beyond the Dyno, Features, Events, Motorsports, Lotus, Mazda, Mitsubishi, Nissan, RX-7, EVO IX, EVO VIII, 200SX, Race Cars, Races & Shows, GTR, Time Attack, 2011 WTAC
Wes Dumalski posted on August 10, 2011 22:07
Project 200SX - Time Trial Bound Part 1.
by Wes Dumalski
Track Photos by Tom Hitzeman
Let's pretend you spend years of your life, thousands of your hard earned dollars, a pint of blood, a gallon of sweat, and countless four letter words building a car. It goes through various stages in its life, and the end result of the project is a car destined for the track.... Two possible outcomes for this somewhat common scenario.... You either become a hard parking car show stunta with a track worthy car or you actually take it to the track. Obviously we chose the latter. The next question was if our last name isn't Johnson, Coleman, or Kojima.... How do we enter the competitive world of motor sport?
The answer..... Time Trials.
[Read the rest of this article...]
Mike Kojima posted on July 19, 2011 23:50
By Mike Kojima
We had just installed a freshly built SR20DE engine for the Dog Car. This is the B14 Nissan Sentra race car that we have been campaigning for many years in road racing and time attack which had been sitting dormant since 2006. With the advent of Redline’s MPTCC race class we decided to dust the car off, freshen it up and have Formula D drifting ace Dai Yoshihara campaign the car in the TU class.
[Read the rest of this article...]
Mike Kojima posted on March 24, 2011 20:44
By Mike Kojima
Fastbrakes is an Arizona company whose claim to fame is making affordable brake upgrade kits for many cars and having applications for niche models like the Nissan Sentra SE-R. Since some of us race SE-Rs as they are a cheap and sturdy platform, we have a lot of experience with Fastbrakes' upgrade kits for the car.
[Read the rest of this article...]
Wes Dumalski posted on August 27, 2010 07:14
Go fast Bits G-Force boost controller!
By Wes Dumalski
Our mates overseas at Go Fast Bits have been hard at work perfecting a new feature packed boost controller called the G-Force that has hit our shores! This cutting edge unit has all the bells and whistles any boost junkie could ask for. We recently put the G-Force through it's paces on Project 200SX in an effort to share our feedback with Go Fast Bits themselves..... Here are our impressions of the unit they sent us.
[Read the rest of this article...]
Wes Dumalski posted on July 14, 2010 19:48
By Wes Dumalski
It's no secret that driving your car at speed on a road course will bring to light all of the car's weaknesses. After sorting the motor and suspension we decided to take Project 200SX to a few track day events to put the car through its paces. While the car has proven dead reliable we certainly found its shortcomings.
[Read the rest of this article...]
 
|
|
MotoIQ Proudly Presents Our Partners:
|