Project Cars

Project Tundra: 5000 Mile Evaluation of Nitto's New Ridge Grappler Tires!

by Mike Kojima

We were very pleased with the Nitto Terra Grappler tires that Project Tundra had been running the last 7 years. We had over 60,000 miles of towing, supercharged burnouts, daily driving and off-roading on them- including a day of driving hard around Willow Springs Raceway. We were very pleased to note that they still had at least 70% of their original tread and still worked quite well!


 

Project GD STI: Getting Rid of Chassis Flex with Cusco

by Mike Kojima

The GD STI/WRX had what was considered to be a very stiff chassis when it was first released internationally in 2000. The new Impreza platform was built to be much stronger than it predecessor and used much of the experience gleaned in rally competition to build a chassis that was over 100% stiffer than its predecessor. However, that was 17 years ago, and the design that was once the leading edge in unibody chassis integrity is now something that is just average.  


 

Project SR E30: Part 1 - Test Fitting the Engine

by Nikita Rushmanov

So, you built an s13 daily with an SR20 in it. It’s reliable, it’s fast, it makes awesome chu-chu noises, you put 5,000 miles on it, but then you realize that there is one thing this car doesn’t have- 4 doors. That is the exact predicament we were in.


 

Project Bugeye GDA WRX: Fixing the Clutch with Exedy

by Mike Kojima

Poor Ian, MotoIQ's FNG's daily was his trusty Bugeye GDA WRX. The WRX has given many years of faithful service, but since joining the MotoIQ crew, Ian's commute has gotten much longer and the miles were taking their toll on the car which has over 200K miles. To make matters worse, on his way to work, the car sprung a huge oil leak and oiled down the super old clutch, and Ian barely limped into the MotoIQ garage. 


 


Project E46 BMW M3: Part 19 – Rear Trailing Arm Bushings and Maintenance

by Pablo Mazlumian

BMW rear trailing arm bushings are rubber and prone to cracking. Ours cracked and rendered the car uncontrollable at the limit. We give you step-by-step how-to on installing Powerflex polyurethane bushings from BimmerWorld!


 

Building the FR-S FA20 with Stay Crushing: Installing the Engine and Making Big Power!

by Mike Kojima

If you have been following our story, we are now ready to install the engine in the chassis.  Our engine has been built for durability with forced induction, and it was time to put it in the chassis to get it tuned!


 

1979 Rolls Royce Silver Shadow II Retrospective Part 1: Introduction, Intrigue, and Quirks in Abundant Supply

by Corbin Goodwin

The rationale for modifying a Rolls Royce explained, and we shine some light on the design and features of this old British brute. Stay tuned to see the unique plans we have for this 1979 Silver Shadow II!


 

Project EP3 Civic Si: Fixing the @$#%! Steering for Good with SHG Motor Works!

by Mike Kojima

In our last edition of Project EP3 Civic Si, we thought we had fixed our car's bump steer and wandering steering with a roll center correction kit and a bump steer kit from Hardrace. Our car had serious issues since day one. When we first got it, no one wanted to drive it because the car would wander around on the freeway and everyone was afraid of getting pulled over for drunk driving.

So, we installed a bunch of suspension stuff and finished it with the Hardrace geometry correcting parts in the front suspension. With the car finally handling well, which is no small task with an EP3, we were finally having fun driving it hard. All was good for a couple of weeks, but then the wandering steering returned with a vengeance. 


 

Project G37S: Survived the 2017 Phoenix Monsoon

by Aaron LaBeau

Imagine what you think Phoenix, AZ looks like in August, and unless you've lived in the area or visited after mid July, you'd probably have the wrong image in your mind. Replace that dry and 115 degree thought with microburst type rain that drops inches of water in a matter of minutes. What started out as a normal afternoon commute home ended up as a serious choice of whether or not to drive.


 

WATCH: Project C7 Corvette Stingray Z51 Baseline Track Test 

So, you read the Part 1 of our introduction to Project C7 Corvette Stingray and probably watched Mike Kojima give us all of the engineering explanations under the chassis. You even read the in-depth breakdown of the LT1 engine. All of this information is great, however, what does it mean for the performance on a racetrack?

We gave our test driver, Karla Pestotnik, a few hot laps to give us some insight and a baseline lap time before we add any performance upgrades in 100% stock form. We hit the tarmac with our friends at Global Time Attack at a Buttonwillow Raceway 13 CW (clockwise) configuration time attack event.


Page 2 of 65First   Previous   1  [2]  3  4  5  6  7  8  9  10  Next   Last   

MotoIQ Proudly Presents Our Sponsors:

© 2017 MotoIQ.com