Project Cars

MotoIQ Project Gen 3 STi Crawford Performance FMIC front mount intercooler turbosmart clamps Project Gen3 STi - Fueling and Intercooling

by Wes Dumalski

You may have heard the expression 10 lbs of shit in a a 5 lb bag before. Well I am fairly certain the origination of that statement came from the first person to try and remove the intake manifold from an EJ25 and work on the systems surrounding and underneath! In our quest for more power and greater reliability we dive into the bowels (the heart would be the engine) of the boxer motor to upgrade our fuel system, improve the intake and intercooler efficiency and well… To reduce the amount of useless crap tucked in to the engine bay. 


 

STi Weds SA15R Kartboy Crawford FMIC

Project Gen 3 STi - Wheels, Bars, and Bits 

by Wes Dumalski

It's single digit temperatures outside and the car is under the knife for a HUGE round of modifications! It doesn't run, we have gotten 14" of snow in the last 48 hours and what are we doing? Why using our daily driver to tow it out of the garage to shoot pictures of our new goodies from Weds Wheels, Progress Suspension, Go Fast Bits, and Kartboy. We risk frost bite to bring you this latest installment of Project Gen3 STi, luckily for you the Internet is warm.


 

igloocase igloo case iPhone 5 MotoIQ review Wes DumalskiTested: Igloo Case for iPhone

By: Wes Dumalski

As much as we like fast cars and sano builds here at MotoIQ we also love tech gadgets! Messing with cameras, microphones, cell phones, instatwittergrambook uploads; all of these things are what we do on a daily basis to bring MotoIQ to the masses. It should go without saying that when new items hit the market that offer us the ability to do those things in a more efficient manner, our pointy nerd ears perk up and our fingers buzz the web in search of said future altering technical goodness. In this case the gadget of mention is the Igloo case for the iPhone. Click on is as we put the case through its paces…


 

Project Gen3 STi GR suspension M7 coilovers SUbaru

Project Gen 3 STi: Suspension upgrade with M7

by Wes Dumalski

When last we left off with Project Gen 3 STi we were enjoying the power and up to this point the only modifications we had done so far were to make the car go faster. It was time to change that as the GR STi is a bit soft around the middle. Our friends at M7 came to our rescue with their Super Street Performance Coilover setup. We were eager to put this new suspension through its paces to see what type of performance it really offered so step inside and read all about it.


 

turbosmart BPV subaru STi impreza

Project Gen 3 STi - Impressions of the Turbosmart IWG75 and BPV

By Wes Dumalski   

"Hey Bro, do you want to test some Turbosmart stuff?" The quoted text is from none other than Martin G from MotoIQ headquarters asking me if I would like to play with any Turbosmart products on our GR STi project. With this project still in the early and mild stages I first scratched my head wondering what I would be able to use and test. When I think Turbosmart I envision huge external wastegates on race cars and e-boost setups. Initially I wondered exactly what I could even use on the STi... Not wanting to miss an opportunity I perused their site and used their vehicle specific search feature to see what they had available.


 

Project GD STI - Checking Out The Development of KW's New 3-Way Adjustable Clubsport Coilovers

By Mike Kojima

A few months ago we visited KW Suspensions' factory in Germany to learn about the development of  their new 3-way adjustable Clubsport coilovers.  We feel that the 3-way Clubsport is a pivotal product for KW.  It promises the flexibility in tuning of expensive elite Motorsports only shocks that are priced out of reach of most enthusiasts in a package that is 50% less than the custom uber dampers.


 

MotoIQ Project Subaru STI

Project GD STI- Improving the Fuel System with Injector Dynamics and Other Details

By Mike Kojima

When we had last left off on Project STI's engine, we had just upgraded the cooling system in anticipation of another round of tuning.  What was supposed to be just some routine installation of a few parts to get a little more power ended up being something a lot more complicated, time consuming and involved.


 

Project GD STI- Getting it Slowed Down with Stoptech

By Mike Kojima

The Subaru GD STI comes with pretty good brakes from the factory, big Brembo 4 piston front and 2 piston rear calipers squeeze big vented rotors. In other words the stock brakes are already quite good, what would have been state of the art just a few years ago. This means we would have to be careful when it comes to modding them, it is easy to mess things up and actually do worse than stock with a poorly engineered brake upgrade.  So why would we want to change them out with something else?  The main reason is that since our car is going to see some occasional track use, we want to upgrade our brakes so we can drive our car to the track for an event without the hassle of having to switch pads at the track.  The big brakes will allow us to run at speed on a streetable brake pad.  Bigger more powerful brakes will also be easier to modulate. The third reason is admittedly that big brakes just plain look cool! We went with Stoptech as the brake system of choice for their combination of daily driveability and track performance.  We selected Stoptech's Trophy STR big brake kit.


 

Cobb SF intake Subaru STi MotoIQ dyno test

Project Gen 3STi: Testing the COBB Intake with Some Anti-Bling

By Wes Dumalski

Welcome to WCOB radio... all Cobb Tuning All the time... OK so yeah... the last few installments of Project GR have sounded like the making of a Cobb Tuning radio station! Well quite frankly every time we get the car to a certain point power wise we talk to our friends at Cobb and they tell us we should "try the SF Intake, it's a trick bit of kit and you will love it..." OK so our arms get twisted and we wind up with Cobb's SF Intake and Airbox along with a slew of Cobb goodies to look the part. In this installment we will be testing the SF intake and airbox along with showcasing the e-tune possibilities with the Cobb AccessPORT. 


 

Project GD STI- Keeping Cool with Greddy and Koyo!

By Mike Kojima

At this stage in the modding of Project STI's engine, it is time for us to lay down some base parts to support our plans for more power later.  One of the weak points of the Subaru intake tract is its top mount intercooler or interheater as some call it.  It is pretty ineffective at cooling the charge air as it sits in a heat chimney right over the engine.  It is fed by a large scoop but air only flows through it at speed.  This makes for irregular intercooler effectiveness.  The top mount intercooler is a legacy of the car's rally heritage where the Subaru engineers wanted to move the intercooler out of harms way.  Interestingly enough the last generations of Subaru's WRC car had front mounts.


 

Page 1 of 3First   Previous   [1]  2  3  Next   Last   

MotoIQ Proudly Presents Our Sponsors:

© 2014 MotoIQ.com