Project Cars

Project 350Z - Testing AEM's Short Ram Air Intake

by Mike Kojima

When we first got Project 350Z as a well used and beat up car, one of the mods the car came with was an Injen Cold Air Intake.  Since Injen intakes have a pretty decent rep we simply left in on the car.  However, when we installed the intake manifold spacer, we noted that the manifold was full of dirt and that our engine was a little low on compression for the amount of miles that it had.


 

Project 350Z - Finding More Power with MotorDyne Engineering

by Mike Kojima

In looking for more low hanging horsepower fruit for Project 350Z, we decided to try an intake manifold plenum spacer from MotorDyne Engineering.  The 350Z's VQ35DE engine has a very thin intake manifold plenum that slopes toward the front of the engine to clear the low hood line.  Although this is good for styling, the engine would prefer more plenum volume and the flow to the front most cylinders is somewhat choked off due to the low overhanging plenum wall.


 

Project Silvia’s Girlfriend: Part 3 - Making it Pretty

by Dave Coleman

It only takes a short glance at any car I’ve ever owned (or any house, or my closet…) to realize I’m the wrong person for this third step on Project Silvia’s Girlfriend. Nevertheless, Sarah wanted a car that was up to her borderline obsessive standards of cleanliness and perfection, so I had to do my best to at least look like I was trying to achieve that. I’ve seen lots of pretty cars before, and I have a reasonable theoretical grasp on how they got that way, so I considered myself up to the task… at least at the beginning.


 

350Z - Boosting Power With DC Sports and Berk Technology

by Mike Kojima

In the past installments of Project 350Z, we took a look at getting the car's suspension and brakes up to snuff.  With the car handling and stopping well, we turned our focus to freeing up some more power.  Since the car is mostly a budget track day beater, we decided against forced induction options for now because making a high power forced induction motor reliable under continual hot lapping conditions is a somewhat expensive proposition.

To keep a decent budget balance, we decided to focus on some good bolt on's to see what we could get from our 350Z.  For our first step we decided to free up the exhaust side of things with headers and an exhaust from DC Sports and free flow cats from Berk Technology.


 

Page 5 of 5First   Previous   1  2  3  4  [5]  Next   Last   

MotoIQ Proudly Presents Our Sponsors:

© 2018 MotoIQ.com