15

Project BOSS 302Revival: Introduction

by Mark Gearhart

Sometimes it’s a disgrace to let a vehicle perish. When crashed beyond their means, some vehicles can cost more than it’s worth to provide a second chance at life. After seeing a 2013 BOSS 302 that was destined to be parted out and discarded, we knew this one couldn’t be left to the vultures. Meet MotoIQ’s latest project vehicle, Boss 302Revival.


 

[Read the rest of this article...]

14

Project DBA R35 GT-R: Upping Stopping Power with Brembo and Race Technologies

by Mike Kojima

As you can see so far in this series, we are doing a lot of things to fight the weight of the GT-R.  At 3800 pounds, the GT-R wheels throw around a lot of mass with a great deal of speed and grace, but it can only do it for short periods of time before the weight takes its toll, mostly on the brakes and tires.


 

[Read the rest of this article...]

11

WATCH: Best New Stuff from the 2017 SEMA Show (Part 2)

Did you not make it to the 2017 SEMA show? MotoIQ has you covered! This year the show was full to the brim. We stopped by the booths of many of our supporters to give you an insider's look at their new products and technologies on display. Here are all the videos in one place, enjoy!


 

[Read the rest of this article...]

10

LA Auto Show 2017: Nerd’s Eye View – BMW

by Khiem Dinh

So, what was going on in the BMW booth? A lot of electric stuff. A lot of ‘M’ stuff. A lot of carbon fiber. It seems you can get a M Performance version of just about any model BMW now- much like how you can get an AMG Mercedes everything. What do you get for the extra Benjamins dished out for the M Performance packages? Fancy carbon fiber exhaust temps with the M logo etched into the tips for one.


 

[Read the rest of this article...]

09

Project DBA R35 GT-R: Getting More Grip with Advan and Toyo!

by Mike Kojima

One of the issues with the R35 GT-R is that it is a big heavy car that gets an amazing amount of performance out of its tires.  The stock tires are a 285/35-20 in the rear and a 255/40-20 in the front. For most cars, this is an impressive amount of rubber but for the 3850 lb GT-R, the car works exceedingly well at first, but the tires quickly fade away.  With some ham-fisted driving, the fading away happens pretty fast.


 

[Read the rest of this article...]

08

Project SC300 Road Racer: Part 12 - Cabin Fever

by Erik Jacobs

The trunk harness was complete. The engine bay harness work and modifications were complete. Now it was time to finally get after the main cabin. And, oh what a project it would be.


 

[Read the rest of this article...]

Posted in: Project SC300
07

Project Corvette Stingray C7 Z51: Keepin' it Cool(er)

by Mike Kojima

Corvettes have always been notorious for overheating on the track. The Z51 shod from the factory with additional cooling capacity is much better in this respect, but it can still run hot under the worst conditions. For this reason, Chevrolet has come out with an auxiliary radiator kit to supplement the engine cooling on the C7. Since we plan to drive our car on the track, you can bet we are going to install this!


 

[Read the rest of this article...]

06

AEM: New DashDesign Software Update - New Features, Layouts and Validated Devices

Industry Press Release

AEM’s new DashDesign Software (Version 1.03.03) is out now and includes new features and templates that enhance the capabilities of CD-5 Carbon (available March 2018) and CD-7 Digital Dashes. Major additions include a new five-gauge layout, a five-gauge layout specific to users who are using FAST XFI EFI systems, new fonts in the font library, count up/count down timers and more!


 

[Read the rest of this article...]

04

WATCH: Best New Stuff from the 2017 SEMA Show (Part 1)

Did you not make it to the 2017 SEMA show? MotoIQ has you covered! This year the show was full to the brim. We stopped by the booths of many of our supporters to give you an insider's look at their new products and technologies on display. Here are all the videos in one place, enjoy!


 

[Read the rest of this article...]

03

Project DBA R35 GT-R: Getting the Ultimate Custom Car Cover with Covercraft

by Mike Kojima

The MotoIQ Megashop is in a pretty dusty industrial area in So Cal. Dust gets into our shop and mixes with the normal shop dirt of metal filings and other stuff that naturally flies around when you work with cars.

So unfortunately, some of the nicer cars in our fleet end up being quickly covered by a mixture of nasty shop dirt and neighborhood dust that can turn a freshly cleaned and detailed car into a pigpen in as little as a week. 


 

[Read the rest of this article...]

02

Nerd’s Eye View: The Cars of PRI

by David Zipf

PRI is full of cool and new speed parts, which the rest of the MotoIQ team is showing you.  But for a PRI newcomer, it’s the cars that really overwhelm you.  They are everywhere!  And, they are all amazing and varied, everything from rally demo cars to Drag Week veterans, to dirt track cars, to original Indy 500 winning racers.  We could fill a novel with the cars we saw, and in fact after walking the PRI floor for an entire day, I STILL hadn’t seen everything there was to see!  Note to self: plan for more vacation in 2018…


 

[Read the rest of this article...]

01

Project MKIV Supra: Part 17– Back in Blue with TwinZ Design

The Supra is out of the paint shop, and ready for action

by Pablo Mazlumian

Our Supra is back with a completed paint job and new TwinZ Design body parts. We're happy with the updated, yet factory-inspired look. Check it out and let us know what you think!


 

[Read the rest of this article...]

31

Project C7 Corvette Stingray Z51: Drivetrain Improvements

by Mike Kojima

The C7 Corvette is truly an exotic car, and we cannot believe the amount of state-of-the-art super trick features it has to offer for the price it commands. One of these features is its rear-mounted transaxle.  Mounting the heavy transmission in the rear of the car and combining it with the differential is a cool way to save weight and helps the Stingray achieve its 50/50 weight distribution.  


 

[Read the rest of this article...]

30

King to Launch New Coated Race Bearings applications at the Autosport International Show

 

Industry Press Release 

King Engine Bearings will be launching new, coated bearing applications at the Autosport International Show. King’s newest coated versions of their race bearings feature pMax-Black™ and the new pMaxKote™. King Engine Bearings will be displaying these new bearings in the Engine Parts UK and Athena booth #E362, taking place at the Autosport International Show in Birmingham England on 11 - 14 January 2018.


 

[Read the rest of this article...]

28

"My Fiancée's" Miata: Part 9 - V8 Roadsters Cowl Stabilizer Braces, Sway Bar End Links and Track Test

by Daniel O'Donnell

Last winter, I was debating all the areas of improvement the Miata needed and first and foremost was chassis rigidity. The car crashes over bumps, the interior rattles and the cowl shakes like an old man’s fist when the neighbor kids are playing ball too close to his roses. It was getting to me and really needed to be the focus for improvement before future modifications could be made. Much like a relationship, a chassis needs to be rock solid for the whole package to work. My fiancée will appreciate that part.


 

[Read the rest of this article...]

26

Project DBA R35 GT-R: Starting the Suspension Revolution with KW Suspension and Forged Performance

by Mike Kojima

It's been a long time since we even mentioned anything about our Project R35 GT-R. We had plans for the car but never could find the time to work on it. The other issue was that the R35 is a world-class supercar, and it is very hard to improve on a car like this without messing it up. It is easy to make it worse with ill-conceived aftermarket parts. 


 

[Read the rest of this article...]

25

Project SR E30: Part 3 - Radiator, Intercooler and Piping

by Nikita Rushmanov

Last time we ended with the SR20 all mounted up inside the E30. Now it’s time to start plumbing it. In this episode, we will be mounting the radiator, intercooler and condenser (yes, you heard that right) as well as making the intercooler and intake piping.


 

[Read the rest of this article...]

24

Happy Holidays from MotoIQ!!

No new content for today, just this little amazing photo of the immaculate conception!   ...Let's not forget the real meaning of Christmas, folks--baby Eric, born from the Virgin Kojima!


 

[Read the rest of this article...]

Posted in: Magazine
21

PRI 2017 - What's New and Cool Edition

by Erik Jacobs

It’s been almost two weeks since the 2017 Performance Racing Industry (PRI) show finished its last day, and this coverage is just now coming out. This should serve as a testament to just how much is at this truly racing-oriented trade show. Unlike the party time vibe that the SEMA show fosters, PRI is all about serious racing business. Sure, there’s a few models here and there, but, for the most part, the wares are the star of the show. Here are a number of things that the MotoIQ staff found interesting this year.


 

[Read the rest of this article...]

20

GTA Super Lap Battle 2017- Finding the Spirit of Time Attack with Blackbird Fabworx

We walked the pits at Global Time Attack Super Lap Battle 2017 in search of the teams that were overcoming severe mechanical failures in order to pursue their fastest lap time. We call this the true spirit of Time Attack, and we think we found it with Blackbird Fabworx owner/driver, Moti Almagor!


 

[Read the rest of this article...]

Page 2 of 184First   Previous   1  [2]  3  4  5  6  7  8  9  10  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com