Parts

 

03

anti lag rocket beyond the dyno

External Combustion Rocket Anti Lag System + JDM Spec C Impreza STI

By Eric Hsu 

The external combustion anti-lag "rocket" combustor was used on the factory Prodrive built WRC STi Subaru cars to improve the EJ20 engine's inherent mediocre torque and engine response. The rocket is so good that a version of it is still in use today in the 2012 Japanese Super GT GT300 STi BRZ which also uses an EJ20. Last time I wrote a teaser article, but this time we'll take a look at some of the details of the rocket combustor anti-lag system as it applies to my buddy Ben's JDM Impreza STi Spec C street car over in the UK. 


 

[Read the rest of this article...]

01

Race Ramps Portable Pit Stop BMW

Race Ramps: Portable Pit Stop

by Jonathan Lawson

Every car guy with a garage dreams of owning a lift, but not all of us have the room for one. Sure, there are small and even portable lift options that don’t require a ton of space, but for those times when you want full access to the underside of your car with the wheels supported, ramps are the ticket. Speaking from experience, however, I’ve never had much confidence in the plastic ramps you can pick up from chain stores, and those can cause a hassle when it comes to getting both ends of the car up, let alone the limited ground clearance they offer. Enter Race Ramps!


 

[Read the rest of this article...]

23

Project Grey Mustang 5.0: Part 8 – Testing Auto Meter’s Elite Gauges

by Vince Illi

We test out Auto Meter’s incredibly advanced Elite gauges and examine the technology that makes some gauges better than others.


 

[Read the rest of this article...]

06

Project E36 M3 Suspension Version 1.1

Project E36 M3: Part 5 - Suspension V1.1 - Sway Bars, Control Arms, and Fender Rolling

by Jonathan Lawson

Coming off an unplanned hiatus, we’re ready to get back into full swing with Project E36 M3. In part 4 we covered our new ARC-8 wheels and Michelin Pilot Sport A/S 3 tires with a sneak peak of the finishing touches on V1.0 of our suspension, and that brings us to the present…


 

[Read the rest of this article...]

22

Nerd’s Eye View: 2013 Performance Racing Industry Show

by Wes Dumalski 

If you were one of the more than 40,000 sets of eyes that had a chance to read through our first PRI article, here is the sequel. In our previous article we slaved from 8:00AM to 1:30AM to bring you 16 pages of goodness! That meant a whirlwind tour through specific booths and a map of what we needed to cover from start to finish. It also left ZERO time to walk around the show and soak it all in on Thursday. So on Friday and Saturday we strolled to bring you what WE thought was cool, the things that caught our eye, our Nerd's eye....


 

[Read the rest of this article...]

14

STi Weds SA15R Kartboy Crawford FMIC

Project Gen 3 STi - Wheels, Bars, and Bits 

by Wes Dumalski

It's single digit temperatures outside and the car is under the knife for a HUGE round of modifications! It doesn't run, we have gotten 14" of snow in the last 48 hours and what are we doing? Why using our daily driver to tow it out of the garage to shoot pictures of our new goodies from Weds Wheels, Progress Suspension, Go Fast Bits, and Kartboy. We risk frost bite to bring you this latest installment of Project Gen3 STi, luckily for you the Internet is warm.


 

[Read the rest of this article...]

29

Performance Racing Industry 2013

by Wes Dumalski

Someone had the genius idea to move the PRI show from Florida to Indiana for 2013 right around the time the entire nation was giving Florida the middle finger for being one of the only states above freezing temperatures. Fitting given that this was my first PRI show, why send the midwest frozen tundra guy anywhere warm? Regardless, more than 1200 exhibitors braved the cold to display their wares and latest performance goodies at the show. Step inside for a taste of what MotoIQ's partners had on display and stay warm...


 

[Read the rest of this article...]

28

GrimmSpeed Subaru top mount intercooler tested MotoIQ

Tested: GrimmSpeed Subaru Top Mount Intercooler

by Wes Dumalski

Around here we appreciate quality and well thought out parts that fill a void in the marketplace. Regardless of company size or the expanse of their market reach it is refreshing to see a company and its collective mindset introduce a product that doesn’t re-invent the wheel but goes a long way to making it much more efficient. In this case that company is GrimmSpeed and that product is their Subaru Top Mount Intercooler. 


 

[Read the rest of this article...]

18

igloocase igloo case iPhone 5 MotoIQ review Wes DumalskiTested: Igloo Case for iPhone

By: Wes Dumalski

As much as we like fast cars and sano builds here at MotoIQ we also love tech gadgets! Messing with cameras, microphones, cell phones, instatwittergrambook uploads; all of these things are what we do on a daily basis to bring MotoIQ to the masses. It should go without saying that when new items hit the market that offer us the ability to do those things in a more efficient manner, our pointy nerd ears perk up and our fingers buzz the web in search of said future altering technical goodness. In this case the gadget of mention is the Igloo case for the iPhone. Click on is as we put the case through its paces…


 

[Read the rest of this article...]

11

Project Gen3 STi GR suspension M7 coilovers SUbaru

Project Gen 3 STi: Suspension upgrade with M7

by Wes Dumalski

When last we left off with Project Gen 3 STi we were enjoying the power and up to this point the only modifications we had done so far were to make the car go faster. It was time to change that as the GR STi is a bit soft around the middle. Our friends at M7 came to our rescue with their Super Street Performance Coilover setup. We were eager to put this new suspension through its paces to see what type of performance it really offered so step inside and read all about it.


 

[Read the rest of this article...]

22

Turn in Concepts TiC X Brace CarLab Development

Tested: TiC WRX Suspension Components 

By Wes Dumalski

Here at MotoIQ we really love our jobs; despite the pay or lack thereof we get the chance to play with some really cool toys, see some really cool cars, and test some cutting edge parts! One of the difficult things we face is having parts we really want to test that do not apply to one of our immediate project cars. When we have those scenarios we are forced to improvise by finding a guinea pig vehicle and having our way with someone else's ride for our own sick pleasure and for the sake of filling this web-site with real world content.  In this case the bovine friendly folks at Turn in Concepts wanted us to put some of their latest products through the proverbial MotoIQ paces and report back with our rants and raves. 

For this test TiC wanted our review on the CarLabs Development X Brace and Super Sexy bushing set for the 02-07 Impreza Sedan platforms.


 

[Read the rest of this article...]

03

team america gtr 

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 9

by Eric Hsu

I realize it's been a long ass time since I've published an update, but they'll start rolling out again somewhat regularly after the new year. The car arrived safely back to Design Craft in September from the giant shipping mishap to China. Progress has been slow with Team American members busy with the remainder of the Formula D season, SEMA, the holidays, and new jobs (for several of us ex-Cosworth people). I never did completely finish the coverage on what happened up until we rolled into the shipping container so part 9 will continue directly from part 8.


 

[Read the rest of this article...]

29

team america gtr

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 8

By Eric Hsu

Mike did a great job covering the build while I was unable to write because I was busy managing the car, team, and build and actually working on the car itself. From part 8 and on, I'll be taking over Beyond the Dyno once again. The car is on the slow boat to Australia, but for now I'll cover some of the things the team and I were doing at Cosworth.


 

[Read the rest of this article...]

23
Project Gen 3STi: Testing the COBB Down Pipe and Exhaust Project STi AccessPORT COBB Tuning AMS automotosport rallysportdirect proto down pipe GR cat-back exhaust MotoIQ Certified Legit

Project Gen 3STi: Testing the COBB Down Pipe and Exhaust

By Wes Dumalski

When last we left off we were singing the praises of AMS and the Cobb AccessPORT, what we left out was the fact that on the way home from AMS we were already making phone calls for more go fast parts. Yes, I had been in the car for all of 10 minutes enjoying the new found power only to realize that more power was just a phone call away. HMM what should I do next? Easy, free up horsepower through less exhaust restriction. The call was to Cobb and it was to discuss the downpipe in particular. I honestly had no plans to replace the stock exhaust as I am a stick in the mud when it comes to loud street cars and quite frankly every Boxer engine with a fart can sounds like Project 200SX with a blown head gasket... (No really they do). 


 

[Read the rest of this article...]

26

Project Gen 3 STi: Testing the COBB AccessPORT

By Wes Dumalski

As it turns out owning a project car is not easy! First and foremost these are real cars owned by real people that pay for them with their own money. Life as well as vehicle practicality and reliability have ways of getting in the way of project car progress and/or completion. Take our Gen 3 GR STi project for example... We had had the car repainted, put back to stock all just so we could start fresh. OK so that is a total lie, the real story is that the previous project car was sold by the owner after blowing up it's totally stock motor on more than one occasion...


 

[Read the rest of this article...]

22

  

Company Profile - Radium Engineering

By Wes Dumalski

por·nog·ra·phy  

[pawr-nog-ruh-fee]

noun: obscene writings, drawings, photographs, or the like, especially those having little or no artistic merit.

Shit, I could use the above to describe just about every article I have ever written. But the reality is that when I first laid my eyes on the offerings of Radium Engineering, PORN was the first thing that came to mind. In the current sea of inferior parts to lay gaze on the products that Radium proudly engineers, prototypes, and builds here in the States is nothing short of inspiring!


 

[Read the rest of this article...]

23

garage tools

Project Garage, Part VII: Garage Tools

By Sarah Forst

A good garage space is useless without an effective collection of tools.  From sockets to ratchets, screwdrivers to wrenches, check out what keeps Project Garage stocked with everything it needs for all kinds of car projects.


 

[Read the rest of this article...]

30
Project Defiant1

Project Defiant1: KA24DE Built Part DEUX! The Devil's Details!

By Justin Banner

Does building a successful engine require thousands of dollars? Not always! Sometimes picking up the throwaway engine is the key to saving on building a great engine! The KA24DE doesn't have the JDM factor, but it does offer more cubic inches, a stouter block, and a powerful aftermarket! Is the garage built KA24DE the key to Defiant1's 350 Crank Horsepower goal? How did I start? Read on to see "the Devil's Details!"


 

[Read the rest of this article...]

23

Adventures in China & Hong Kong, Part 2

by Eric Hsu

Back in May this year, I took a trip to Dongguan China to train a customer on the Cosworth ECPro ECU and its accompanying software suite. After spending almost a week in a not so Westernized city, it was great to be back in Hong Kong where the old, modern, rich, poor, foreign, and Chinese all come together in a densely populated peninsula. Forunately I was introduced to some locals who were cool enough to show me around for the 2.5 days I had free. I think I saw more E92 M3s and R35 GTRs on that trip in Hong Kong than I've seen in Beverly Hills collectively in the last three years.


[Read the rest of this article...]

17

Red or Blue threadlocker?

Ask Sarah: Red or Blue thread locker?

By Sarah Forst

I just recently completed Eibach lowering springs and anti-sway bars upgrade on my 08 Infiniti G37S Coupe.  My question is when and where should I use threadlocker (red/blue) or Loctite? Different sources say different things, but is there a rule of thumb for applying these adhesives?

Thanks,
Kelvin

Got a difficult tech question? Email Sarah at asksarah@motoiq.com


[Read the rest of this article...]

Page 1 of 4First   Previous   [1]  2  3  4  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com