350Z

 

08

Hooman Rahimi's 350Z: Pro 2 and the Cost of Drifting

by Taylor Haney

At the end of a long day or week, we all have our own way of unwinding and loosening the shackles of responsibility. For some of us, it might be alcohol or working out at the gym, but for Hooman Rahimi, it’s always been about roasting some tires.


 

[Read the rest of this article...]

04

Project 350Z - Testing Jim Wolf Technology C2 Camshafts

by Mike Kojima

So far we have tried some easy bolt ons like a manifold spacer, headers, high flow cats and exhaust on our 350Z all with good results.  Naturally at this point it is time to change camshafts to get more bolt on power out of our VQ35DE engine.  One thing that discourages many people from going this route is that changing cams on a VQ engine is quite a big job. Having two banks of cylinders and 4 cams is a lot of the reason.  It's not super hard technically but it requires at least a couple days of wrenching and some care has to be taken to avoid problems.

Time consuming or not, camshafts are the next logical progression in the evolution of Project 350Z so we asked our friends at Jim Wolf Technology or JWT to provide us with some of their excellent C2 cams.  We chose the C2 because they were probably the biggest practical camshafts that would work in the stock bottom end engine. 


 

[Read the rest of this article...]

05

OnPoint Dyno's 350Z: 420 NA WHP

by Frank Ewald

When your business allows you access to a dyno 24/7 and your mind is always in overdrive trying to find new ways to make horsepower, then you are in the perfect spot to be coming up with ideas, developing these ideas, and testing these ideas. Meet Sasha Anis, owner of OnPoint Dyno and a true racer at heart. His naturally aspirated 420 wheel horsepower Nissan 350Z and its individual throttle body set-up is one of those ideas. However, before we get into that let's take a look at the car and groundwork that Sasha is building on.


 

[Read the rest of this article...]

05

350Z Track Monster - from Bling to Brute in 12 Easy Steps!

by Frank Ewald

In just a few years this 350Z has transformed from a pristine example of a Nissan 350Z to a mean and lithe example of an incredibly effective track car. Aesthetics being tossed aside in the aim to gain that fraction of a second to attain the top of the podium. The question that I asked, and likely some of you are wondering also, is how did Mike go from being a hard parker to being one of the most focused time attack drivers that I have met. I mean, he is so intent and tenacious at the track that it is difficult to have a conversation with him. When the competition is over, he is more than ready and willing to talk about his car and his journey into the world of Time Attack. Sorry for misleading you, though, it actually took a lot more than 12 steps to build this race package and none of them were easy!


 

[Read the rest of this article...]

21

Supercharging the Nissan VQ35DE with Vortech!

by Mike Kojima

The Nissan VQ35DE in all of its variations is one of the best six cylinders on the market, light compact and smooth it has a lot of potential for modification. The VQ35DE and its variants in the VQ family is found in the G35 and 350Z.  Although the VQ is a nice performance engine, in the US market it is only available in naturally aspirated form.  Naturally aspirated limits your power, especially when you are talking about a streetable engine on pump gas. 

In our search for more power we decided to try another direction: supercharging.  For our test mule we used a G35 coupe which already had a lot of the basic bolt ons. To this we applied Vortech's bolt on intercooled VQ35DE kit.  The Vortech kit is a relatively easy bolt on and has the advantage that if installed exactly as is, it is a CARB approved 50 state legal system with an EO number.  This is a huge advantage if you live in California or any area that requires smog testing for registration.


 

[Read the rest of this article...]

24

Project 350Z- Building a New Engine Part 3

by Mike Kojima

In our last edition of Project 350Z we started to assemble our VQ35DE and got the bottom end pretty much done.  Now we finish off our engine and take it to Church Automotive Testing to get our factory ECU tuned using the UpRev Osiris tuning package.


 

[Read the rest of this article...]

09

Project 350Z: Buidling a New Engine - Part 2

by Mike Kojima

When we last left off on Project 350Z, we were in the process of assembling a group of parts to enhance the durability of our project car.  As we stated before we were not looking at building the ultimate naturally aspirated VQ35DE but simply a more durable one that could hold up to a life of track days, drift days and stunt driving practice days. If we could get a little more power out of the engine while we were in there, all the better.


 

[Read the rest of this article...]

13

Project 350Z: Building a New Engine - Part 1

by Mike Kojima

Our Project Z was a pretty good example of what a naturally aspirated VQ35DE could do. However, our  VQ had become old and tired. It was worn out from a lot of minimal maintenance street miles, track days, drift and professional stunt driving practice and had started to develop some rod knock.  Luckily we were able to stop before serious damage to the engine internals resulted.  However an engine rebuild was in order. 

Our objective in building this engine is not to build the most awesome NA VQ possible or even to get tons more power, but rather to perform an economic build to address some of the VQ's durability shortcomings, replacing stock parts when necessary with some good quality aftermarket bits.


 

[Read the rest of this article...]

02

Project Nissan 350Z UPDATE - New Owner New Plans

MotoIQ Staff Report

Furious 7 stunt driver has taken over the controls (and ownership) of MotoIQ Project Nissan 350Z! Our 350Z project was originally built as a reliable street/track performer, but like any car with an overworked odometer the miles have been stacking up and the original engine finally threw in the towel. It's no surprise either, as it has been in the hands of stunt driver Jay Lynch for almost the past year. Jay has not only been using the car to work on his stunt driving techniques, but Jay has also been using the car to pass down his driving skills to his daughter Brionna Lynch.


 

[Read the rest of this article...]

01

Project 350Z - ECU Tuning With Church Automotive and UpRev

by Mike Kojima

If you have been following the progress of Project 350Z as of late we have been testing and running the gamut of  your typical bolt on performance parts to see what kind of gains could be expected for a well tuned but lightly modded VQ35DE.  With an intake, exhaust, headers, intake manifold, cams and valve springs in place, it was time to get into the ECU and tune for our specific combination of parts.

To perform the final touches on Project 350Z we headed to Church Automotive Testing, a licensed UpRev Tuner to have our car dialed in.


 

[Read the rest of this article...]

22

Project 350z: Testing the MotorDyne Engineering MREV 2 Intake Manifold

by Mike Kojima

We are reaching the limit of easy bolt on performance gains with Project 350Z.  In looking over the offerings from MotorDyne Engineering, the folks that bought us the intake manifold spacer which made such an awesome difference. we noticed that they had a lower intake manifold plenum available for the VQ35DE that would work for both the Rev-Up and original intake cam only variable cam timing engines.


 

[Read the rest of this article...]

14

Project 350Z- Testing the AEM Induction Cold Air Intake

by Mike Kojima

In our last trip to the dyno, we tested  AEM's Short Ram intake on our 350Z.  We were surprised to find a small but definite power increase over another leading intake that was already on the car.  Since AEM makes a long runner Cold Air Intake as well as the Short Ram, we decided to test that as well as an interesting contrast between the two vastly different intake designs.


 

[Read the rest of this article...]

09

Project 350Z- Increasing Oil Capacity with Jim Wolf Technology

by Mike Kojima

We have been working on getting more power out of Project 350Z's VQ35DE engine in our latest series of articles.  With success coming bit by bit, we decided that we had to give the oiling system a little help.  Some 350Z's with highly modified suspension and sticky tires have suffered from engine oiling issues when driven on the track hard.  The oil had simply sloshed away from the pickup under hard cornering allowing the oil pump to suck air.  Since engine bearings are made of soft metal and depend on a hydrodynamic layer of pressurized oil to prevent damage, any interruption of oil pressure caused damage very quickly.


 

[Read the rest of this article...]

23

Project 350Z - Testing AEM's Short Ram Air Intake

by Mike Kojima

When we first got Project 350Z as a well used and beat up car, one of the mods the car came with was an Injen Cold Air Intake.  Since Injen intakes have a pretty decent rep we simply left in on the car.  However, when we installed the intake manifold spacer, we noted that the manifold was full of dirt and that our engine was a little low on compression for the amount of miles that it had.


 

[Read the rest of this article...]

24

Project 350Z - Finding More Power with MotorDyne Engineering

by Mike Kojima

In looking for more low hanging horsepower fruit for Project 350Z, we decided to try an intake manifold plenum spacer from MotorDyne Engineering.  The 350Z's VQ35DE engine has a very thin intake manifold plenum that slopes toward the front of the engine to clear the low hood line.  Although this is good for styling, the engine would prefer more plenum volume and the flow to the front most cylinders is somewhat choked off due to the low overhanging plenum wall.


 

[Read the rest of this article...]

21

350Z - Boosting Power With DC Sports and Berk Technology

by Mike Kojima

In the past installments of Project 350Z, we took a look at getting the car's suspension and brakes up to snuff.  With the car handling and stopping well, we turned our focus to freeing up some more power.  Since the car is mostly a budget track day beater, we decided against forced induction options for now because making a high power forced induction motor reliable under continual hot lapping conditions is a somewhat expensive proposition.

To keep a decent budget balance, we decided to focus on some good bolt on's to see what we could get from our 350Z.  For our first step we decided to free up the exhaust side of things with headers and an exhaust from DC Sports and free flow cats from Berk Technology.


 

[Read the rest of this article...]

15

Global Time Attack Road Atlanta 2013 Doug Wind SRT4

Global Time Attack - Round 1 - Road Atlanta 

By Wes Dumalski 

Quality images by Sarah Forst and mediocre shots by Wes Dumalski 

Attacking time is a funny thing… All sorts of things happen during these 2 day race weekends and no one knows what mother nature or Newton has in store for us. This past weekend at Road Atlanta both of these personas had a chance to show us who's boss and utterly prove that we are in control of very little. In this case the Saturday forecast brought likely promises of rain and when the teams hit the track to sunny skies they were in a fury to set down fast laps as no one knew (not even the weather people; do they ever?) what would unfold. As luck would have it the rain held off and as teams pushed ever further it was Newton who would prevail on this day. Through 11 wins in a row and numerous track records the Professional Awesome EVO VII would turn its last laps in anger, its life cut short by Road Atlanta.


 

[Read the rest of this article...]

28

Fast Fridays - Just Another Friday Night in Kansas

By Pablo Mazlumian

Cars, cars and more cool cars...in Kansas?  Coastal American residents likely wouldn't expect to see such an assortment of muscle cars and exotics in the KC suburb of Overland Park, Kansas.  Shoot, it's adjacent to a town called Prairie Village.  But when spring arrives, a slew of local enthusiasts get together every other Friday to cruise and talk shop.


 

 

[Read the rest of this article...]

15

ACT - Performance Clutch Kits 2003-2006 Nissan 350Z

ACT - Performance Clutch Kits For The 2003-2006 Nissan 350Z

Industry Press Release

Advanced Clutch Technology's clutch kits for the 2003-2006 Nissan 350Z 3.5L V6 (VQ35) include a N021X pressure plate, a choice of disc, a release bearing, pilot bearing and alignment tool.  These kits meet SFI Spec 1.1 and have increased torque capacity up to 520 lbs./ft. at the crankshaft.


 

[Read the rest of this article...]

25

Wilwood Nissan 350Z/G35 Big Brake Kits

Industry Press Release

Wilwood Disc Brakes announces improved good looks and braking performance for the Nissan 350Z and Infiniti G35.  These new front and rear brake kits are designed for easy bolt-on installation and are compatible with the OE master cylinder, ABS system.


 

[Read the rest of this article...]

Page 1 of 3First   Previous   [1]  2  3  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2017 MotoIQ.com