Honda

 

  • Ruckus
  • S2000
  • Civic SI
12

Project AP1 S2000: Installing Hasport AP Differential Mounts

by Vincent Soto

Our Project AP1 S2000 is a daily workhorse. It’s almost 17 years old and is coming up on 140,000; the car has been a good reliable daily driver that sees some spirited driving every now and then. 

Recently, we discovered that the differential mounts on Project AP1 S2000 were torn and started to leak. Instead of going back to the OEM liquid filled mounts, we decided to just go with a more solid mount. After driving Project AP2 S2000 and feeling how well the Hasport mounts felt, it was a no brainer to go with them again! 


 

[Read the rest of this article...]

06

Hondata's Land Speed Record Honda CRX

by Mike Kojima

A lot of armchair racers like to comment on Land Speed Racing saying things like "how hard could it be to go 200 mph at Bonneville, it's a big flat dry lake, all you have to do is floor it" or "I can almost go that fast down the freeway with my Civic with a turbo kit".  Well, all we have to say about that is to go try and find out just how good you are if you think you can.


 

[Read the rest of this article...]

29

AES Auto: A Civic for Street and Strip!

by Frank Ewald

Two years ago, we first met the AES Auto team at Mission Raceway Park. That chance meeting has resulted in many hours of joint work on projects and the enjoyment of a great group of car enthusiasts. At the centre of it all is the shop - AES Auto. In the shop is the quarter mile car. The AES Auto Civic is an ongoing work in progress. It's currently a ten second car that runs consistent 140 mph passes in the quarter mile. It's a street car. And, it has served as a tow truck to move disabled vehicles about the shop yard.


 

[Read the rest of this article...]

20

Project EP3 Civic Si: Fixing the @$#%! Steering for Good with SHG Motor Works!

by Mike Kojima

In our last edition of Project EP3 Civic Si, we thought we had fixed our car's bump steer and wandering steering with a roll center correction kit and a bump steer kit from Hardrace. Our car had serious issues since day one. When we first got it, no one wanted to drive it because the car would wander around on the freeway and everyone was afraid of getting pulled over for drunk driving.

So, we installed a bunch of suspension stuff and finished it with the Hardrace geometry correcting parts in the front suspension. With the car finally handling well, which is no small task with an EP3, we were finally having fun driving it hard. All was good for a couple of weeks, but then the wandering steering returned with a vengeance. 


 

[Read the rest of this article...]

29

Project EP3 Civic Si: Can an Oil Change Affect Horsepower?

by Mike Kojima

A lot of people have asked this question before, and the jury has been out on whether this is something that is true or not. We have attempted to test to see whether certain brands of high-quality oil have a gain in power over others before with mixed results. Our dyno tests have always been inconclusive with the differences being too small to be considered or perhaps caused by variables such as differences in viscosity or sump level.


 

[Read the rest of this article...]

11

Project EP3 Civic Si: Fixing EP3 Bumpsteer with Hardrace

by Mike Kojima

In prior editions of Project EP3 Civic Si, we went over the history of the car- the worst handling Civic made with suspension geometry taken right from the Stream minivan. Well, so far we have gotten rid of squishy rubber and added sway bars with help from Whiteline. We also got rid of the flaccid shocks with a set of coilovers from Fortune Auto. Now we will address bumpsteer issues with Hardrace!


 

[Read the rest of this article...]

04

Project EP3 Civic Si: Installing Fortune Auto 510 Coilovers!

by Mike Kojima

Over the past few installments of our EP3 project, we have been working on fixing on what is perhaps the car's major weak point, the handling. Previous Civics were known for excellent handling with 4-wheel multi-link suspension. The EP3 however, uses the suspension from a Japanese market Stream van in a really dumb case of parts bin engineering. 


 

[Read the rest of this article...]

28

Project EP3 Civic Si, Suspension Upgrades with Whiteline! 

by Mike Kojima

So everyone into Hondas just about universally ignores or even hates the dumpy EP3 Civic. The EP3 represents, to most Honda fans the generation of Civic where Honda lost their brand identity and started to make cookie cutter shitboxes. 


 

[Read the rest of this article...]

03

Project EP3 Si: Going 5 Lug with Wheels from Enkei and Nitto NT05 Tires

by Mike Kojima

Now that we converted our EP3 Civic from 4 to 5 lug hubs and added big brakes, there was no going back.  In order to drive the car, we obviously needed to do something about our wheel situation.  Our goal was to stuff the biggest tires we could into the stock wheel wells.  Unlike our hellaflush brethren, we want big and we want traction, not stretching a narrow tire on a wide rim and stupid amounts of negative camber.  


 

[Read the rest of this article...]

23

Japanese Cars That Don't Suck

by Mike Kojima

I pissed a lot of people off with my Japanese Cars Suck article a few weeks ago, where I expressed dismay at the boring state of the Japanese car industry. Japan Inc. seems to be producing either the uninspired transportation device or the trying too hard, over the top stuff that seems like something out of the Fast and the Furious or Transformers franchises.


 

[Read the rest of this article...]

18

Project EP3 Civic Si, Improving the Brakes with Fastbrakes, Stoptech and Willwood

by Mike Kojima

In the last edition of Project EP3 Civic Si, we explained how we went about converting our car from 4 lug to 5 lug hubs. We did this for two reasons: one to take advantage of the larger selection of 4x114.3 bolt circle wheels available on the market and to take advantage of the larger RSX Type-S wheel bearings and axles to stiffen up the bearing system in anticipation of performance fixed caliper brakes and more power from a possible engine swap.


 

[Read the rest of this article...]

13

Testing Meguiar's Two Step Headlight Restoration Kit!

by Mike Kojima

Any car that has the newer plastic headlights will experience weathering and yellowing eventually. This is caused by UV light exposure degrading the protective coating on the surface of the lights. Once the coating is eroded, UV light makes quick work of the clear plastic underneath, and the light becomes cloudy and yellow. 


 

[Read the rest of this article...]

05

Building the Naturally Aspirated Honda K Engine! Part 4- Burns Header and Tuning

By Mike Kojima

If you have been following our previous articles of our build of the naturally aspirated K24, we built the engine with the objectives being to build an engine that could run reliably in a high downforce, high grip chassis, have a wide powerband and run on California 91 octane pee water gas.  


 

[Read the rest of this article...]

16

Building the Naturally Aspirated Honda K Engine Part 3, Assembling the Engine

by Mike Kojima

In the previous two installments of our engine build, you were able to take a look at the parts we will be using to build the bottom end and the cylinder head of our Ariel Atom. Notably, we went with a Dailey Engineering dry-sump system, since the Atom has a lot of aero-enhanced grip, and we want to avoid oil starvation.


 

[Read the rest of this article...]

18

Project DC2 Integra - Fixing Old Clutch Woes With Centerforce

by Mike Kojima

Our DC2 Integra was a great find, in near unmolested close to stock condition despite being a GSR and being over 20 years old. Most DC2's of this era have either been mauled by a few generations of ricers, stolen several times or kept as treasured garage queens behind locked gates only to be driven to meets or other special occasions. 


 

[Read the rest of this article...]

05

Building the Naturally Aspirated Honda K Engine with Drag Cartel! Part 2

by Mike Kojima

In the last edition of building the naturally aspirated K24, we were showing some of the detail of building a solid dry sumped bottom end for an Ariel Atom track car with a lot of aero. In this edition, we will be getting rid of the K24 Z7's main performance bottleneck.​


[Read the rest of this article...]

27

The Spoon Sports Center Seat Civic at Super Lap Battle!

by Mike Kojima

We hope you've been following our progress in updating the Spoon Sports USA Time Attack FWD Unlimited Civic here on MotoIQ.  The idea behind this round of modifications was to mildly update the car, improve its safety and reliability, clean up the aerodynamics, and to try some new ideas that will be incorporated into a possible new build by Spoon Sports with the Type R Civic due next year.


 

[Read the rest of this article...]

26

Update: Spoon Sports USA Time Attack Civic!

by Mike Kojima

If you are a Honda fan or a follower of Time Attack then you are probably familiar with the Spoon Sports USA Civic, the little Honda that could. Last year the Spoon Civic with Formula Drift Champion Dai Yoshihara at the wheel, set the Time Attack world on its ear by surpassing the previously thought unbeatable FWD Unlimited lap record for Buttonwillow 13 CW.


 

[Read the rest of this article...]

12

Zestino Gredge 07RS Race Track Tire Test

by Karla Pestotnik

It would be pretty comical if we saw Usain Bolt running the 100 meter dash in the Olympics without shoes. He would most likely not be breaking any world records or winning any gold medals without shoes on. Undoubtedly, a good pair of track spikes has helped Usain gain the traction he needs to push himself forward and eclipse the run in record breaking pace. The same can be said for someone looking to whip up some quick lap times with just wheels and no tires on. A good set of high-performance tires can make or break the handling capabilities of any vehicle. This concept applies even more so on a purpose-built vehicle designed to push the limits of lateral g's around a race track.


[Read the rest of this article...]

06

Building the Naturally Aspirated Honda K Engine!  Part 1

by Mike Kojima

The Honda K series of engines is one of our favorites and one of the top production inline 4 engines ever produced in our opinion.  Last year we built a turbo K24 Z7 for a giveaway by Motovicity.   With the turbo project being put to bed we got another opportunity to build a K motor in the form of a naturally aspirated K24 Z7.


 

[Read the rest of this article...]

Page 1 of 6First   Previous   [1]  2  3  4  5  6  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2017 MotoIQ.com