Borg Warner

 

19

Team America BNR32 GT-R First Update in a Long Time!

by Mike Kojima

So most of you probably thought that the Team America GT-R was dead, long abandoned to the scrap heap or maybe left in a pile somewhere in Australia. Not so! After a humiliating first appearance at the 2014 running of WTAC down under, the car has been under reconstruction.


 

[Read the rest of this article...]

07

MotoIQ SEMA 2016 Spotlight - BorgWarner Turbo Systems

MotoIQ Video

Mike Kojima, Editor-in-Chief of MotoIQ, checks in with BorgWarner at the 2016 SEMA show to hear about their new products for 2017.


 

[Read the rest of this article...]

17

Airwerks S400SX-E 88mm Turbochargers Available Now

Industry Press Release

BorgWarner has added an S400SX-E super core to its successful line of AirWerks® series turbochargers. Featuring an 88-mm inducer Gen-C7 forged milled compressor wheel, this new high-performance unit enables an engine to achieve over 1,575 horsepower per turbocharger. Key features include S500 power potential in a S400 frame size, an integrated speed sensor boss and a 360-degree thrust bearing, which improves thrust capability and extends turbocharger life.


 

[Read the rest of this article...]

13

Project [Rotary] FD RX-7: Part 6 - V-Mount Cooling System (Overview and Intercooler)

by M-P Spierer

The cooling system in the FD RX-7 is widely regarded as its most glaring weakness. Many of the engine's cooling components are constructed out of plastic, the intercooler is wildly undersized, and the orientation of the radiator does not allow for proper airflow to the intercoolerIn the next two installments of Project [Rotary] FD RX-7 we tackle these issues by implementing a 100% custom V-mount cooling solution. 


 

[Read the rest of this article...]

17

Performance Racing Industry: Part 2

by Pablo Mazlumian

If you’ve read our PRI Part 1 coverage, you saw that PRI had a lot in store for us this year. However, there’s so much stuff it’s simply too much to cover in just one article, unless you wanted to flip through 90 pages. So, welcome to MotoIQ's Part 2 of our five-part PRI 2015 coverage! Let's resume the most in-depth PRI coverage you’ll find online!


 

[Read the rest of this article...]

21

Performance Racing Industry 2014: Part 1

by Pablo Mazlumian

If you like to the latest and greatest in performance parts, as well as high performance streetcars and racecars, you're going to want to flip through the many pages of our PRI 2014 coverage.  In fact, we covered so much that we had to split this up into three big articles!


 

[Read the rest of this article...]

07

The Road to Speed Week Part 2: The Progress Continues

by Chuck Johnson

When last we left off, Project 240SX LSR was under the knife again, in the midst of an entire electrical system and engine management revamp. In this update, we'll continue to follow 5523 Motorsports, Specialty Car, and the rag tag Team MotoIQ as they continue the build with parts from AEM, Fastbrakes, and Earl's Performance Products.


 

[Read the rest of this article...]

06

Project 240SX Land Speed Racer:  Better Living through Volumetric Efficiency

by Chuck Johnson

After removing more than one cylinders' worth of displacement from an SR20DET, the need to improve the volumetric efficiency of our engine through forced induction became absolutely critical. In other words, if we were going to have any chance at breaking land speed records, we'd need a badass turbo system and there was simply no room for scrimpin' here.  So, we stocked our turbo system with the best components we could find:  A Borg Warner EFR turbo, dual Turbo Smart Hyper Gates, and a stainless steel Full Race Motorsports turbo manifold.  Then, we made all the right connections with Earl's Performance Products.


 

[Read the rest of this article...]

22

Nerd’s Eye View: 2013 Performance Racing Industry Show

by Wes Dumalski 

If you were one of the more than 40,000 sets of eyes that had a chance to read through our first PRI article, here is the sequel. In our previous article we slaved from 8:00AM to 1:30AM to bring you 16 pages of goodness! That meant a whirlwind tour through specific booths and a map of what we needed to cover from start to finish. It also left ZERO time to walk around the show and soak it all in on Thursday. So on Friday and Saturday we strolled to bring you what WE thought was cool, the things that caught our eye, our Nerd's eye....


 

[Read the rest of this article...]

29

Performance Racing Industry 2013

by Wes Dumalski

Someone had the genius idea to move the PRI show from Florida to Indiana for 2013 right around the time the entire nation was giving Florida the middle finger for being one of the only states above freezing temperatures. Fitting given that this was my first PRI show, why send the midwest frozen tundra guy anywhere warm? Regardless, more than 1200 exhibitors braved the cold to display their wares and latest performance goodies at the show. Step inside for a taste of what MotoIQ's partners had on display and stay warm...


 

[Read the rest of this article...]

26

tilton evo tsukuba circuit yokohama

Nerd's Eye View: Tilton Interiors Mitsubishi EVO 9

by Eric Hsu

Right around the corner this weekend on October 18-19 is the 2013 World Time Attack Challenge (WTAC). I bring to you in great detail the Tilton Interiors EVO 9. It was the fastest EVO at the 2012 WTAC...sorry make that the fastest UNIBODY EVO and 2nd overall fastest car overall at Sydney's 2012 World Time Attack Challenge last year. This car was one of my favorites at WTAC 2012 because it is the embodiment of a true Time Attack car without all the random crazy flaps, wings, and panels sticking out all over the place and the rear half of the car cut off and replaced with tubes. Sure you'd need some money to recreate the Tilton EVO, but was still 100% pure Mitsubishi CT9A EVO. After the jump is the way you'd have your dream EVO if you had the right combination of builders, crew, driver, owner, and of course money.


 

[Read the rest of this article...]

20

The Heart of a Record Breaker II:  The Doctor Is In

by Chuck Johnson

In our last story, we covered the basic design of our land speed record breaking engine we've dubbed the SR15VET 20V.  This time around, we'll take a deep look inside the engine and detail its build with none other than our resident Nissan guru, Nick Hunter of 5523 Motorsports.


 

[Read the rest of this article...]

17

MotoIQ's Project 240SX Sets a Land Speed Record at El Mirage!

By Annie Sam
Photos by Joe Lu and Sharry Lai

After three years of building and chasing a dream, MotoIQ's Project 240SX Land Speed Racer claimed the Southern California Timing Association's (SCTA) H/PS class land speed record for El Mirage!


 

[Read the rest of this article...]

20

Project 240SX Land Speed Racer:  Racecar Livery, the Function Behind the Form

By Chuck Johnson  Photos by Joe Lu

I’ve put together a lot of cool project cars over the years and would like to think that with each one, I push the envelope a little bit further and get a little better at what I’m doing.  I’ve learned a lot from building racecars and a good portion of that learning in most recent years I’d say, is far beyond that of just turning a wrench.


 

[Read the rest of this article...]

03

team america gtr 

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 9

by Eric Hsu

I realize it's been a long ass time since I've published an update, but they'll start rolling out again somewhat regularly after the new year. The car arrived safely back to Design Craft in September from the giant shipping mishap to China. Progress has been slow with Team American members busy with the remainder of the Formula D season, SEMA, the holidays, and new jobs (for several of us ex-Cosworth people). I never did completely finish the coverage on what happened up until we rolled into the shipping container so part 9 will continue directly from part 8.


 

[Read the rest of this article...]

18

nemo evo title

Sneak Peek: The NEMO Racing EVO, Part 2

Story by Eric Hsu, MotoIQ photos by Jeff Naeyaert, other photos by NEMO Racing

In Part 1 we covered a little of the history behind Chris Eaton and the NEMO Racing EVO, some of the build process, and the car's exterior features including the balls out aero. This time in Part 2, we'll cover what's going on inside and some of the awesome details that makes this EVO the fastest Time Attack EVO in the world.


 

[Read the rest of this article...]

29

team america gtr

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 8

By Eric Hsu

Mike did a great job covering the build while I was unable to write because I was busy managing the car, team, and build and actually working on the car itself. From part 8 and on, I'll be taking over Beyond the Dyno once again. The car is on the slow boat to Australia, but for now I'll cover some of the things the team and I were doing at Cosworth.


 

[Read the rest of this article...]

17

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 6

By Mike Kojima and Eric Hsu 

So much has happend on the car that it was a bit much to go over it all on one sitting so here is part 2 exactly one day later.  We will take the story up where we left off before.


 

[Read the rest of this article...]

24

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 4

Supposed to be by Eric Hsu, Really by Mike Kojima

In the last segment, Gary Castillo of Design Craft Fabrication was starting to work on the rest of the car's fabrication.  With the clock ticking away and a lofty early June completion date looming closer, it was decided to let the gutting of the rear section of the car wait until next year.  In my opinion this year will just be a development year for us to get some experience with the car and the World Time Attack format.


 

[Read the rest of this article...]

20

Team America World Time Attack - ARK Design's BNR32 Skyline GT-R Part 3

Supposed to be by Eric Hsu, Really by Mike Kojima

In our last segment we had a look at the entirely new front suspension of the Team America/ARK Design's BNR32 Skyline GT-R.  With a tight deadline, Eric can not get around to writing these updates so I am doing them for him.  The car is scheduled to be loaded in a container to Australia by early June and the clock is ticking.  I don't know how we are going to make it but everyone on the team is cranking in all of their free time.


 

[Read the rest of this article...]

Page 1 of 2First   Previous   [1]  2  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com