Entries for 'Pablo Mazlumian'

29

Tested! BMW 335i NGK Coils and Bosch Plugs

by Pablo Mazlumian

One of the problematic areas of the BMW 335's N54 3.0-liter twin-turbocharged engine is the ignition failing, specifically with the coils. And, unfortunately, a new set of coils and plugs can run you over $800 at the stealer. Today we show you how to refreshen those components with new OE replacements from Sparkplugs.com, and we save nearly $500!


 

[Read the rest of this article...]

08

Nerd's Eye View - Inside 10,000 horsepower!

By Pablo Mazlumian

How do they make so much power?  We get a MotoIQ-exclusive, close-up look at the fascinating engine details of the 2012 Championship winning Matco Tools Top Fuel dragster driven by Antron Brown.


[Read the rest of this article...]

20

Project E46 M3: Part 18 – Project M3 vs E90 M3 V8

by Pablo Mazlumian

We were pleased with our S54 3.2-liter in stock form, and the goal was to bring it up to V8 M3 performance. Was a 12% power improvement and 90-lb fat reduction enough? Find out inside! We test them to speed and in the quarter-mile. We also compare them from 30-100 MPH in third gear to compare low- and mid-range torque for you track guys! And why not--we even throw in a Mustang GT 5.0 in there...


 

[Read the rest of this article...]

15

10 Ways To Prepare Your Car For Spring And Summer

by Pablo Mazlumian

Most of us have a daily-driven vehicle that sees year-round driving. In an area where the temperature delta can exceed 100F in a given year, that starts to play a significant role in the vehicle’s wear and tear, as well as fuel economy. We’ve compiled 10 things to consider when readying your car for the upcoming warm season. Doing these things will not only ensure better fuel economy and overall performance, but increased life of the vehicle itself.


 

[Read the rest of this article...]

Posted in: Magazine, Tech
13

Project E46 M3: Part 17 – The preferred exhaust setup and more AEM tuning by MKC

by Pablo Mazlumian

Life would be a lot easier if we'd stayed with the stock headers, but when we tested our VAC headers in Part 3, the increase in power was too much to let go. Since then, we've tried different header-back systems but they either were too loud, droned at low RPM, or didn't fit all too well. Today, however, we think we've found something that works great and doesn't break the bank. Dynos graphs and video clips inside!


 

[Read the rest of this article...]

01

Industry Insider: A Tour Through Aeromotive Fuel Systems

by Pablo Mazlumian

We bring you a MotoIQ-exclusive tour one of the fuel system industry's greats.  We get to learn some of Aeromotive's secrets to success, and even get to poke around some of its professional racecars!


 

[Read the rest of this article...]

06

PRI 2016 Street Outlaws Edition: Part 2 – Turbos!

by Pablo Mazlumian

If you enjoyed Part 1 of our Street Outlaws PRI coverage, you’re going to love this one. We’re talking big, huge, and stupid turbos! We've got Big Chief's famous Crow Mod, Jeff Lutz's Pro Mod, the Murder Nova, and more!


 

[Read the rest of this article...]

31

PRI 2016 Street Outlaws Edition: Part 1 – The Nitrous and Supercharged!

by Pablo Mazlumian

PRI 2016 was full of famous cars from the Street Outlaws show on the Discovery channel, and we took the opportunity to give you a closer look at several of them. This two-part series is full of info on these stupid-fast cars and crazy drivers you won't find on the show, and today we start with the nitrous and supercharged!


 

[Read the rest of this article...]

23

PRI 2016: Part 5

by Pablo Mazlumian

In the first four parts of PRI 2016, we've shown you a ton of parts and a plethora of racecars. In this installment we not only have more parts to show you, but we also take a more in-depth look at some of the world's most highly advanced racecars! Let’s get started!


 

[Read the rest of this article...]

17

PRI 2016: Part 4

by Pablo Mazlumian

Oh boy. If you like Hondas, Corvettes, crazy boosted motorcycles and trucks, fuel injectors, superchargers, compound turbo systems, and nitrous, you've found the right article to browse!


[Read the rest of this article...]

09



PRI 2016 – Part 3

by Pablo Mazlumian

If you like turbos, superchargers, other engine parts, wheels, aero, and electronics, this is a must see. We’re back with our third installment of the show, with plenty from Precision Turbo, AEM, Burns, Dynojet, CSF, Steve Morris Engines, Arias, Radium, CPE, and more!


 

[Read the rest of this article...]

20

2016 PRI: Part 2

by Pablo Mazlumian

If you enjoyed Part 1 of our 2016 PRI coverage, make sure to check out Part 2. We've got cool stuff from Turbonetics, DeatschWerks, Brembo, Borg Warner, AiM, TurboSmart, and more!


 

[Read the rest of this article...]

19

2016 PRI Show – Part 1

by Pablo Mazlumian

MotoIQ is proud to bring back the most comprehensive PRI coverage you'll find anywhere online. Period. Check out the latest turbos, superchargers, wheels, fuel cells and fuel accessories, and engine components in Part 1! And we'll have several more parts to follow.


 

[Read the rest of this article...]

28

Project M3: Part 16 – Koyorad All Aluminum Radiator Installation

by Pablo Mazlumian

Until now, Project M3's benefitted from increased power, braking, and handling performance, as well as nice improvements to the interior and exterior aesthetics. But keeping things cool under the hood is something we haven't touched on yet, and we do so today with an all aluminum radiator from Koyorad!


 

[Read the rest of this article...]

30

Level Motorsport BMW E30: Part 2 - Brakes and engine

by Pablo Mazlumian

We're back to check out Level Motorsport's great work on this little BMW racer, and this time we conclude with the brakes and engine components. How much power is this car (which is fully built with used or in-house fabricated components) putting down, you ask? We've got the dyno chart, too.


 

[Read the rest of this article...]

25

Level Motorsports E30 BMW: Part 1 - Safety, Aerodynamics, and Grip!

by Pablo Mazlumian

Take a look at this crazy E30 BMW, and learn the story of how it went from a street-driven rust bucket of a 325i to the time attack and hill climb racer it is today. And it was all built by one guy with second-hand parts!


 

[Read the rest of this article...]

11

Project M3: Part 15 – More Exhaust Testing and Weight Reduction

by Pablo Mazlumian

We test a new exhaust system and drop some weight in the process. We've got dyno graphs and videos in this one. Plus, we check out dad's new 8-Series BMW and drastically change its looks with a simple wheel upgrade. Check it out.


 

[Read the rest of this article...]

09

Project E46 M3: Part 14 - Short Shift Kit and Lightweight Clutch Testing!

by Pablo Mazlumian

We not only install one of the best short shift kits money can buy, but also test a lightweight clutch and flywheel--on the dyno! How often do we see publications spending the time doing that? Does it make a difference? We answer that here, plus we check out a supercharged E46 M3 racer that rolled into Modified by KC's shop that day!


 

[Read the rest of this article...]

26

Project E46 M3: Part 13 - Lightweight clutch and flywheel, and more!

by Pablo Mazlumian

Our E46 M3 is really coming along. In the power department, in order to get significant gains we're pretty much at a point where we either need to get into the motor, or go forced induction. However, a clutch and flywheel is one way we can get more out of the already existing power. In the next two parts we install and dyno test a Clutch Masters FX400 clutch and lightweight flywheel, and show you several other products we used to drop more weight for additional overall performance.


 

[Read the rest of this article...]

28

Hypercar Development’s Hyper1200 Tri-Turbo McLaren MP4-12C

by Pablo Mazlumian

Check out Hypercar's maniacal tri-turbo system for the McLaren MP4-12C and 650S! As if these supercars weren't enough, HyperCar takes them to a whole other level. Check it out, as this story is chock-full of engine pictures, videos, and dyno graphs!


 

[Read the rest of this article...]

Posted in: Magazine, Tech, Engine
Page 1 of 4First   Previous   [1]  2  3  4  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2017 MotoIQ.com