Entries for May 2015

30

AEM Expands Porsche 997 Plug & Play Infinity ECU to Include Both Naturally Aspirated and Turbo Models!

Industry Press Release

AEM has expanded its Porsche 997.1 Infinity ECU to include the 2005-'08 Carrera, Targa and GT3 in addition to the 2007-'09 Turbo and GT2 models. The Infinity ECU part number is PN 30-7109, and the new Infinity Plug & Play Adapter Harness for 997 Porsches is PN 30-3905. When combined with AEM's Plug & Play Adapter Harness, the Infinity completely replaces the factory Porsche 997.1 ECU and does not require any additional accessories, sensors or modules for proper operation. Installation can be completed in about an hour when using all of the factory sensors.


 

[Read the rest of this article...]

29

New StopTech Big Brake Kits for 2015 VW GTI 

Industry Press Release

Centric Parts®, North America’s leading manufacturer and supplier of aftermarket brake components and systems for domestic and import vehicles in every driving condition, has introduced a range of front StopTech® Big Brake Kits for the 2015 Volkswagen GTI. 


 

[Read the rest of this article...]

28

Track Life: Episode 2 - Wheel Bearings & Wheel Studs

by GTChannel

Rob and Karla show you how to install a new wheel bearing, a hub and ARP wheel studs on Rob's personal track-ready Honda S2000.


 

[Read the rest of this article...]

Posted in: Magazine, Features
27

Polystrand GT-Lite CRX: Part 4 - Bringing the Design Concept to Life!

by Jonathan Spiegel

As we left off in the previous installment, we’d completed our prototype suspension design, done some analysis on the springs and arms, and sent the dissected chassis off to the body shop to get some much needed love. Now comes the part that is almost as much fun as driving – bringing the design concept to life!


 

[Read the rest of this article...]

26

Event Coverage: 2015 Indianapolis 500

by David Zipf

The Indianapolis 500 is an American icon.  For 104 years, a 2.5 mile rectangular oval set in the Indiana countryside has been host to one of the longest enduring motorsports events in the world.  The challenge is simple: build the fastest car you can.  Tune it for maximum speed. Then, make it last for 500 miles at 225 miles an hour.  Oh and make sure you do that faster than 32 other drivers.  But cross that single yard of historic paving bricks first, and you join racing royalty.  Drink the milk.  Kiss the bricks.  Have your likeness and name engraved on an antique silver cup.  Be written into history as an Indianapolis 500 champion.


 

[Read the rest of this article...]

25

NX GTi-R - The Search For Traction: Finale

by Frank Ewald

We quickly got our car through tech, got the Volks and RRs mounted, and headed onto the recently redesigned Driver’s Development Track at CTMP. It took three to four laps to get the car warmed up, a couple of more to be sure that it was ready, and then – with the GFB Electronic Boost Gauge set to 12 lbs – with Katie in the passenger seat we went hot. And literally started laughing and high fiving. On the way down in the RV Katie had a discussion with me that the car simply was not working. It was not fun. It was not reliable. All of that was forgotten as we could step on the gas and it would simply take off. Exiting the corner… at the apex… even before the apex. The Nismo LSD was literally better than I had even imagined – the car pulled like mad through the corners. After two laps I had to pull off. Katie knew it was to give her a turn behind the wheel – when in actuality it was because I was on such an adrenaline buzz that I had to park.


 

[Read the rest of this article...]

23

AEM Charge Pipe Upgrade For 2015 Subaru WRX 2.0L FA20DIT

Industry Press Release

The VA series 2015 Subaru WRX is quickly gaining traction in the tuner community due to its all-new 2.0L FA20DIT direct injection boxer engine with a twin-scroll turbocharger. The VA series 2015 Subaru WRX is the first WRX to move away from the EJ-series engine. Drivability of the WRX has been improved because the 2.0L FA20DIT makes peak torque numbers twice as soon as the 2.5L EJ engine


 

[Read the rest of this article...]

22

CSF Cools BMW: The Ultimate Cooling Solution For The E9X M3

Industry Press Release

CSF cools BMW with their new Ultimate Cooling Solution for the E9x M3. With a 4 piece cooling package proven in the 25 Hours of Thunderhill endurance race you know your BMW E9x M3 will stay cool under pressure.  


 

[Read the rest of this article...]

21

Event Coverage: 2015 Indianapolis 500 Qualifying

by David Zipf

The stories going into qualifying for the 99th running of the Greatest Spectcle in Racing were supposed to be grand.  New aero kits.  Ed Carpenter going for a record setting third straight 500 pole.  Chevy's dominance in racing.  Team Penske's dominance in qualifying.  Honda's desperate attempt to close the gap to Chevy.  And the biggest story of all: would the long standing 1996 track record finally fall?


 

[Read the rest of this article...]

20

Victoria Day Speedfest

by Frank Ewald

The weather was clear and sunny for the four days at the Castrol Victoria Day Speedfest at Canadian Tire Motorsport Park. Qualifying began on Thursday and continued throughout the weekend, with racing taking place on Saturday and Sunday. The range of cars was incredible as the events included Formula 1600 Super Series, Canadian Supercar Series, Canadian Touring Car Championship, Porsche GT3 Challenge, and the Pirelli World Challenge with three classes running. This was also the first event for the NASCAR Canadian Tire Series - so there was a huge range of cars to capture the attention of race fans.


 

[Read the rest of this article...]

20

Extreme Engine Tech: Building a BMW S52 – Part 1: The Short Block

by Nick Betz

There comes a time in a project build when you just have to throw everything out the window and rewrite your storyboard. Over the years we’ve been bolting on parts to Project E36 323is and not seeing the gains we were looking for. Sure it’s been fun but it’s time to make some real power. We had plans for an M50 manifold swap paired with M3 cams, bigger air meter, headers and throttle body but as the old adage goes, there’s no replacement for displacement, so that’s where our journey has taken us.


 

[Read the rest of this article...]

17

Help For Yukio Taira!

Industry News (please share): This Thursday a good friend of MotoIQ and a well known face in the industy, Yukio Taira the Aftermarket Marketing Manager at Turbo By Garrett, had a stroke on his flight to Road Atlanta where he was headed to handle race support. If you're someone that Yukio has helped with sponsorship or just a caring person please show your support as the medical and family expenses will be piling up during his recovery time.

Please visit Yukio's Go Fund Me page and help out.  Every little bit counts.

MotoIQ has in its thoughts the Taira family, Yukio's friends and everyone in the industry that is impacted by this tragic incident.

God Speed.


 

[Read the rest of this article...]

16

NEW Yokohama Advan Racing RZII

Industry Press Release

The Advan RZII is the latest in Yokohama's Advan Racing Wheel line up. The RZII combines all the wheel industry's leading performance techniques all into one beautiful shape.


 

[Read the rest of this article...]

15

AEM Releases GM LS 58x Plug & Play Engine Wiring Harness for Infinity ECU!

Industry Press Release

AEM has released its Plug & Play Engine Wiring Harness for GM LS race engines with a 58x timing pattern. This comprehensive, high-quality wiring harness allows racers to easily and affordably integrate the Infinity-8h Programmable ECU onto their 58x LS race engine by plugging into the factory coil sub harnesses and using factory sensors.


 

[Read the rest of this article...]

15

PZ Tuning's 660WHP Awesome Civic

by Frank Ewald

There is nothing like seeing a race car in action. Even more, there is nothing like watching a race car move from a bare shell into a Global Time Attack Unlimited Front Wheel Drive class winning race car. William and Noreen Au-Yeung welcomed me into their store, Point Zero Audio and PZ Tuning, then opened the shop doors so that I could follow along on the build of this Honda Civic.


 

[Read the rest of this article...]

14

GarageLove: The New Generation of Racer

by Per Schroeder

“You can look at a Pinewood Derby Race in a variety of ways. You can make your project look cool, you can make it look like your favorite car or you can make it fast. Which do you want to do?”

I want to win.”


 

[Read the rest of this article...]

13

Wrench Tip: How To Make Diff Oil Changes Easier

by David Zipf

Changing diff oil sucks enough without doing it on the ground in the dead of winter.  This Wrench Tip makes changing diff oil suck slightly less than normal.


 

[Read the rest of this article...]

12

Event Coverage: Angie’s List Grand Prix of Indianapolis

by David Zipf

The Verizon IndyCar Series decided to fluff up the Month of May by hosting a road race on the former Formula 1 circuit that runs through the infield of Indy.  The first event was best remembered for its disastrous start when pole sitter Sebastian Saavedra’s car stalled on the grid and was rear-ended at speed.  In 2015, the boys and girls of IndyCar returned to the speedway’s road course to put on another show.  Only one week after showing off their fancy oval kits, the teams strapped on road course bodywork and took to the flowing roval circuit.


 

[Read the rest of this article...]

11

Project Viper GTS Part 4 Intro

Project Viper GTS: Part 4 – Baseline Dyno and K&N Intake Test

by Billy Johnson

The Viper is truly a car built around its engine.  In Part 4, we take Project Viper GTS to the dyno for a baseline power audit and see if our mighty 8.0L V10 is cranking out the factory claimed 450hp and 490lb-ft of torque.  From there we add K&N replacement air filters and change out the disruptive corrugated plastic intake tubing for a set of ROE Racing polished aluminum smooth intake tubes to see if we can squeeze out a few more ponies.


 

[Read the rest of this article...]

09

King Engine Bearings Announces 2015 Race Bearing Application Guide

Industry Press Release

King Engine Bearings announces their 2015 new racing specific application guide. It includes many new popular applications for both domestic and import vehicles. It also includes information about King’s innovative pMax-Black™ metal structure and new geometric features.


 

[Read the rest of this article...]

Page 1 of 2First   Previous   [1]  2  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com