Entries for April 2016

28

Vehicle Importation: Understanding the 25 Year Old Rule

by Sean Morris

I get this question about once a week these days, “Are the Skylines really going to be legal when they are 25 years old?”  It’s a loaded question. The answer is actually yes, and no, as it all depends where you live. In North America, Canada is an exception, but even in the United States the rules have some variance. Since I live in California, the answer is actually yes, but no.  Yes, because the 1989 Nissan Skyline will be federally legal to import once it’s 25 years old in 2014, but no because vehicles 1975 or newer are subject to direct import laws in California.  These direct import laws make it very expensive to bring a car into California compliance. However, for the purposes of this article, I won’t get too far into the downside of the upside of 25 year old vehicle import.


 

[Read the rest of this article...]

27

Sneak Peek: Porsche’s New Turbo Engines

by Khiem Dinh

We knew it was coming. The first sign was the Porsche Macan with its twin-turbo V6s. The European emission requirements of reduced CO2 output made it happen. That and Porsche’s European counterparts at BMW, Audi, and Mercedes all had extensive use of turbos in their performance vehicles. Whether you like it or not, the new 911 Carreras and Boxster/Cayman twins are coming with smaller displacement turbo engines in place of the old larger naturally aspirated engines.


 

[Read the rest of this article...]

Posted in: Magazine
26

Evaluating the ACT Heavy Duty Clutch and XACT Prolite Flywheel for the Honda S2000

by Mike Kojima

Vince, our FNG, drives a Honda S2000 that serves as his daily driver.  The S2K takes him to work and school day in and day out.  However the Honda also serves as a track day vehicle seeing duty at Willow Springs, Buttonwillow and Cal Speedway.  After serving reliably for 80,000 miles the clutch suddenly went out on Vince on his way to work.


 

[Read the rest of this article...]

25

"My Girlfriend's" Miata: Part 4 - Brake Upgrade with Good-Win-Racing and DBA USA

by Daniel O'Donnell

We’re doing it people. The impossible is becoming possible. We’re taking a car that I don’t own or insure and slowly turning it into a track vehicle that is someone else’s day-to-day responsibility. That being said, in order to keep up this ruse, I can’t screw up its daily manners too much or the girlfriend might catch on to my plan. This was a big concern for me when I was planning one of the most important systems for the track, the brakes!


 

[Read the rest of this article...]

24

New T3 4-Bolt 1.06 A/R Turbine Housing for GEN2 PT6870 CEA® Turbo

Industry News

PRECISION TURBO AND ENGINE has added a new, T3 4-bolt 1.06 A/R turbine housing to the available options for the popular GEN2 PT6870 CEA® turbocharger.

The new turbine housing features a T3 inlet flange and a 3" 4-bolt discharge, and is available in a 1.06 A/R ratio for GEN2 PT6870 CEA® turbos with either Precision's "Ported S" or "Ported H" compressor covers. For racers who already utilize a T3 4-bolt compatible exhaust manifold, it is now possible to simply bolt on Precision's GEN2 PT6870 CEA® turbocharger.


 

[Read the rest of this article...]

23

Competition Clutch Announces New Flywheels for G35/350z and G37/370z Applications 

Industry News

The new Competition Clutch Single Mass Flywheels (SMF) for the Infiniti/Nissan G35/350Z and G37/370Z provide high quality alternatives for customers needing to replace the factory dual-mass flywheels (DMF). The SMF alternative eliminates the use of the complex and expensive DMF.


 

[Read the rest of this article...]

20

Project Isuzu VehiCross Part 7: Getting Hitched With Curt Manufacturing

by David Zipf

One of the reasons we bought a VehiCross, on top of its coolness, was the ability to tow another car.  See, the VehiCross is not my only car.  I have two others that are both in various states of disrepair and both are in Delaware, where I was born and raised.  Currently, my two real projects are 650 miles from where I make my home in Kentucky and if I ever intend to drive these toys again I will need to get them here and get to wrenching.  Now, we could hire a delivery service to pick up the cars and drag them down here, but that’s a) very expensive, and b) difficult since, while both cars start, they barely run.  So we decided to do the towing ourselves.  First we installed a hitch, then we hooked up a car.


 

[Read the rest of this article...]

19

Polishing Project STurdteen with KBD Body Kits - Part 1

by Rathyna Gomer

A few years ago, this ridiculous trend swept the drifting community after the introduction of what us drifters call a “missile car”. During a track day a few months ago I was doing some tandem runs in my missile car and ended up getting hit after I spun out and went off course by the follow car. 

If I hadn’t already proved it to you after Part 1, drifters destroy everything – side skirts, fenders, doors, bumpers, and more. Unlike other forms of racing, it isn’t necessarily about the lightest, most aerodynamic parts – it’s about the most durable parts! For that reason, I decided to go with KBD Body Kits, owned by parent company American Plastic Technologies. 


 

[Read the rest of this article...]

17

Project Evo X GSR: Completing the Suspension with Whiteline

by Mike Kojima

It's been a long time between updates on Project Evo X GSR.  It hasn't been for lack of trying, the car has been through a couple of different owners and it's been hard to catch up with it.  Well we have caught up with it at last and it's time for some long awaited parts to go in.

It's a good thing too, Whiteline has come out with some new parts for the Evo X in the meanwhile.  When the project was more active, the only parts available were swaybars but since then they have come out with a roll center and bump steer correction kit, a kit to reduce front lift and add positive caster, an adjustable camber link and a full bushing set. 


 

[Read the rest of this article...]

16

Advanced Clutch Technology (ACT) has released a new family of clutch kits for the 2013-2015 Ford Focus ST.

Industry Press Release

ACT’s new clutch kits for the Focus ST are designed for use with the OE Dual Mass Flywheel and include a Heavy Duty pressure plate, a choice of disc, release bearing assembly and alignment tool. The Heavy Duty pressure plate incorporates hardened diaphragm fingers for decreased wear and provides a 33% increase in clamp force over the stock unit.


 

[Read the rest of this article...]

14

Paul Walker - Lost Footage

by GTChannel

During a recent move, GTChannel discovered unused footage of Paul visiting the world-renowned GT-R performance shop, Mine's Motor Sports.


 

[Read the rest of this article...]

Posted in: Videos
12

Plastic is Fantastic:  Part 6 – Assembling the Beast

by Jonathan Spiegel

As usual, racecars rarely get finished on schedule when you’ve got a day job, but that hasn’t stopped us from burning up weekends (and a little midnight oil on weeknights as well). When we last looked at the Polystrand CRX GT-Lite car, we had just finished creating the new rear framework for the trick IRS assembly. For those of you who haven’t been following the project so far, you can click here to catch up on the first 5 installments of this crazy journey. Without much fanfare, we’re going to jump right back in, since we’ve made a lot of progress since then.


 

[Read the rest of this article...]

11

Project Viper GTS: Part 6 - Corsa Exhaust and Kooks HFC

Project VIPER GTS: Part 6 - Corsa Performance Exhaust and Kooks Green Cats

by Billy Johnson

After some impressive gains from intake work in Part 4, we now turn our attention to the opposite side of the engine to improve the evacuation of exhaust gasses as well as reduce the cabin temperature of our notoriously hot viper.  For as outlandish and attention grabbing the Viper’s style was, the exhaust note did not have the same head-turning appeal.  To remedy this we reached out to our friends at Corsa Performance for their 3” cat-back exhaust to give our viper a more sporty and refined tone.  To further boost the volume and greatly knock down the calf-burning side sill heat, we installed a pair of compact Kooks Green Cats which are both environmentally and power friendly. 


 

[Read the rest of this article...]

10

Project E46 M3: Part 12 – Whiteline Front Control Arm Lower Inner Rear Bushing, Alignment, and Tumbler Switch fix

by Pablo Mazlumian

It’s hard to believe that nearly an entire year has gone by since we’ve last updated Project E46 M3. The car's been running great, and the 320-plus WHP normally-aspirated S54 six-cylinder never ceases to amaze. This time we enlisted Whiteline for its drop-in, lower inner rear bushings for the front control arms, and performed a quick fix to the steering column. We also got an alignment at a very unassuming shop with interesting machines inside! Take a look.


 

[Read the rest of this article...]

06

Turbo Tech: Calculating Compressor Flow

by Khiem Dinh

Hopefully you’ve already read our Turbo Tech: Size Matters article which gave a crude cheat sheet for sizing a turbocharger depending on your engine size and intended application. No real engine data is required to get you into the ballpark turbo size you would need. What if we do have some data though? A bit of simple math can let us plot compressor operating points more accurately on a compressor map.


 

[Read the rest of this article...]

05

350Z Track Monster - from Bling to Brute in 12 Easy Steps!

by Frank Ewald

In just a few years this 350Z has transformed from a pristine example of a Nissan 350Z to a mean and lithe example of an incredibly effective track car. Aesthetics being tossed aside in the aim to gain that fraction of a second to attain the top of the podium. The question that I asked, and likely some of you are wondering also, is how did Mike go from being a hard parker to being one of the most focused time attack drivers that I have met. I mean, he is so intent and tenacious at the track that it is difficult to have a conversation with him. When the competition is over, he is more than ready and willing to talk about his car and his journey into the world of Time Attack. Sorry for misleading you, though, it actually took a lot more than 12 steps to build this race package and none of them were easy!


 

[Read the rest of this article...]

04

Fabricating Turbo Headers and Exhaust Systems with Eimer Engineering and Burns Stainless

by Mike Kojima

How do you make a good turbo system even better?  We did it by enlisting the help of Burns Stainless. Our subject car had a turbo LS engine.  Although the car made lots of power, it had issues with lag, a drop in top end power, a ton of weight in the nose that negatively impacted handling and a propensity to burn up everything under the hood.


 

[Read the rest of this article...]

03

Project Supra: Part 14 – Precision Turbo's GEN2 PT6870 CEA Turbocharger

by Pablo Mazlumian

Since the recent wintery weather hasn’t allowed this Midwest import to have much fun, we've been rather quiet with regard to Project Supra. But the weather's breaking, and so will traction--thanks to the GEN2 PT6870 CEA turbo madness from Precision Turbo! Check it out...


 

[Read the rest of this article...]

02

ACT Releases SFI-Approved Performance Clutch Kit(S) for Audi and Volkswagen 2.0L Turbo TSI 6 Speed Applications

Industry Press Release

Advanced Clutch Technology (ACT) has released a new family of clutch kits for the Audi and Volkswagen 2.0L Turbo TSI 6 speed applications. ACT’s new clutch kits for the 2.0L Turbo TSI 6 speed include a Heavy Duty pressure plate, Streetlite flywheel, a choice of disc, release bearing, and alignment tool. The Heavy Duty pressure plate incorporates hardened diaphragm fingers for decreased wear and provides a 30% increase in clamp force over the stock unit.


 

[Read the rest of this article...]

02

CSF Introduces Drag & Tuck Radiator Lines

Industry Press Release

CSF is proud to announce the release of their King Cooler Ultimate Drag Race Radiator and their tuck radiator series developed in partnership with Rywire. The CSF King Cooler is a great off the shelf solution for drag racing cooling needs that is lightweight, compact and efficient. While the Rywire tuck radiator tucks completely under the core support to give the engine compartment a clean sleek look which compliments tucked wiring and plumbing.


 

[Read the rest of this article...]

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com