Entries for January 2010

30

HKS R35 GT-R Intercooler

HKS USA, Inc. Introduces its Large Front-Mount Intercooler Kit for the Nissan R35 GT-R

Industry Press Release

LOS ANGELES (January 29, 2010) – HKS USA, Inc., the premier manufacturer and supplier of premium automotive performance systems, introduces its large front-mount intercooler kit for the Nissan GT-R. 


 

[Read the rest of this article...]

29

Taipei, Taiwan 2009

by Eric Hsu

What to do, where to go, what I did, and as usual, my opinions during my Christmas trip to Taipei, Taiwan. Plenty about Taiwanese food, night life, friends, and tourist spots inside.


[Read the rest of this article...]

29

MotoIQ Project Scion TC

Project Scion tC at Thunderhill Video!

By Jeff Naeyaert

Check out this cool video of our Project Scion shot at the NASA Six Hours of Thunder hill.


 

[Read the rest of this article...]

28

 

Project Racer - Part 7: Recipe for Racing

By Annie Sam

Being a fast road racer requires five main ingredients; 2 cups drivers skill, 1 cup killer suspension, ½ cup of grip, a dash of reliability, and of course, 2 tablespoons of horsepower. Now that you’ve learned the basics of racing, and driving through following the progress of Project Racer, let’s turn our attention to the next ingredient - horsepower. Though a detailed buildup of a Performance Touring race car could be found detailed in various other project vehicles on this site, what automotive project – project racer included - is complete without the mention of upgrading a racecar? After all, as project racer, I couldn’t race without building a racecar, now could I?


[Read the rest of this article...]

27

Revenge of the Nerd: Bravo Toyota!

By Mike Kojima

Today Toyota announced perhaps what is the most extensive, comprehensive and expensive recall in the history of Automotive manufacturing.  The recall involves eight of their best selling models from the Camry to even our Project Tundra.  2.3 MILLION vehicles will be affected by this recall. In an unprecedented move, Toyota has also stopped all sales and production of the potentially affected models as well. This affects more than 100,000 brand new Toyotas in the sales pipe line.  This is STOPPED, dead cold, with thousands of workers at plants and dealerships who as of next Monday will be sitting around twiddling their thumbs. This recall will probably be disastrous financially for Toyota.


 

[Read the rest of this article...]

27

Project Pathfinder Cams, ECU's, & Headers

Project Pathfinder Part 8, Cams, ECU, Headers

By Mari Umekubo

The stock VG cam shafts are very mild.  At the advice of the guys at Nissan Motorsports we added a set of their #2 off road cams to Project Pathfinder.  The cams have 264 degrees of duration and .430” lift with a 106 degree intake and 116 lobe center as opposed to the tiny stock 248 degrees duration and .374” lift with 114 lobe centers.  This is quite a difference and the cams really woke Project Pathfinder up.


 

[Read the rest of this article...]

26

Yokohama Tire Logo 

Yokohama Tire returning to SCCA Solo Competition!

MotoIQ Staff Report

FULLERTON, CA. – (Jan. 26, 2010) –Yokohama Tire Corporation is returning to the Sports Car Club of America (SCCA) as a contingency sponsor for the 2010 Tire Rack® SCCA Solo National Tour and Solo National Championships. Yokohama’s ADVAN Neova® AD08 ultra high-performance tire is now eligible for the SCCA’s contingency program for the series and championship.


 

[Read the rest of this article...]

25

FXMD Time Attack NSX driven by Billy Johnson

FX Motorsports Development to enter the World Time Attack Challenge

MotoIQ Staff Report

FX Motorsports Development is proud to announce their entry in the 2010 World Time Attack Challenge at Eastern Creek Raceway in Sydney, Australia! Many of the top teams around the globe will be attending this event to find out who is the fastest in the world! Eastern creek is renowned as a horsepower track and with the highly experienced Billy Johnson doing the driving they will certainly be one to watch on the 21st 22nd May!


 

[Read the rest of this article...]

24

MotoIQ Project Honda S2000 S2K

Project S2000 Part One, Wheels and Tires

By Khiem Dinh, photos by Jeff Naeyaert

The Honda S2000 or S2K as it is affectionately known is one of our favorite cars from one of our favorite brands, Honda. Its most endearing feature is its front engine rear drive chassis with a front mid engine configuration giving an ideal 50/50 weight distribution.  Although the S2K has a bad reputation as being a twitchy, hard to handle car, we have found, that with the proper modifications, it is just the opposite, a sweetheart that is easy for a reasonably skilled driver to flat out haul ass in that is nearly impossible to make understeer.


 

[Read the rest of this article...]

23

Baller Dyno Headers

by Eric Hsu

A quick look at some of the dyno headers sitting around waiting to be used at Cosworth in Torrance. It's a pretty good collection of 321 stainless and inconel tubes!


[Read the rest of this article...]

22

RC engineering 1000cc injectors for EVO 4G63

Ask Sarah- How to fix your EVO

By Sarah Forst

First, repeat after me- you can’t go reliably fast if your wallet is on a diet!  Although you haven’t given me enough information to properly answer your question as I don't know what other parts are on your car, I will give it a guess assuming you are not spending much money on your 4G63 to begin with. Your current setup includes too small a turbo and probably too undersized a fuel system for those boost levels.  Let’s start with the stock turbo on the Evo VII.

Got a Tech Question?  Email Sarah at asksarah@motoiq.com


 

[Read the rest of this article...]

18

Nissan QR25DE Engine Turbo by Jim Wolf Technology

Jim Wolf Technology's Turbo Nissan QR25DE Powerhouse - Part 1

By Mike Kojima

Compared to the late great SR engine family, the early Nissan QR25DE has a spotted history as a performance engine.  In the performance world it has earned a reputation for being fragile and the many recalls that Nissan has had for serious problems from blowing head gaskets to blowing rods out the side of the block has furthered this reputation.  The engine's redeeming features are a cylinder head that flows extremely well, a light overall weight and a strongly supported crank and lower end. A fragile engine is not going to work for our time attack Spec-V so we are going to address the engine’s weak points and see if we can turn the QR into a solid performer capable of racing levels of performance and reliability.


 

[Read the rest of this article...]

18
16

World Time Attack Challenge - May 21-22, 2010 Australia

by Eric Hsu

photo by Sean Klingelhoefer (I stole this awesome shot from a photo forum).

This event will be a very exciting Time Attack event. The Aussies will have the home court advantage, but will the Japanese or Americans show up and clean house? Take a wild guess who I'm rooting for. More details and video inside.


[Read the rest of this article...]

13

Speedtech EVO 9 DRAG: 8.63 @ 164MPH in New Zealand

by Eric Hsu (and technically Andre Simon)

Speedtech Motorsports in New Zealand has the AMS drag EVO in their crosshairs. Watch the 8.63 run and read about some of the car's trick details inside.


[Read the rest of this article...]

13

Suck Squish Bang Blow

Suck, Squish, Bang, Blow - Part 1: Everything You Ever Wanted To Know About Engines (But Were Afraid To Ask)

By Mike Kojima

In the coming months we will explain all of the basics of how to extract more power from that noisy chunk of metal connected to the wheels.  Your new knowledge can be put to good use when selecting hop up parts for your ride, helping you make good solid choices of where best to spend your hard earned money. With knowledge you will be able to make informed choices when buying parts and will be less likely to get punked by unscrupulous mechanics. In this series we will explain how all the popular hop up parts work, how to understand there specifications and how to pick the right parts to best fit your needs.


 

[Read the rest of this article...]

12

MotoIQ Project Toyota Tundra

Project Toyota Tundra Part One, TRD Suspension and Brakes

By Mike Kojima

Since we are all about worry free towing, we decided to look into getting a new full size truck.  Over the years we have used about every truck on the market including the Dodge Ram and Ford F250 SD (which was our current favorite truck).  Dan Gardner, owner of our Project Scion racecar was awfully impressed with the Tundra he received on long-term loan from Toyota and recommended we give one a try.


 

[Read the rest of this article...]

11

Mazdaspeed3 SEMA

Wrench tips colored electrical tapeWrench Tips #9: Wrench in Color

by Dave Coleman

Harbor Freight Tools, purveyor of cheap knockoff tools made with underaged cripple slave labor, has finally produced something unique, original and of real value to the world.

 


 

[Read the rest of this article...]

08

Cosworth Big Bore Head Gaskets for Sleeved Blocks

by Eric Hsu

Did you know Cosworth offers big bore gaskets for sleeved blocks? Look inside for pressure clamping load test results and imprints for Cosworth vs. other head brand head gaskets.


[Read the rest of this article...]

07

twin disc carbon carbon clutch

Clutch Technology Part Two, The Clutch Disc Friction Material

By Mike Kojima

In our first segment on clutch technology we discussed the pressure plate and how it works.  However the pressure plate is only half of the equation when it comes to clutches and how they work.  We cannot ignore the all important disc. The clutch disc is such a simple device, yet it has a significant responsibility, the responsibly of transferring the engine’s torque to the ground. It also controls most of the clutch’s driveability characteristics. A disc can be the difference between a clutch that is grabby, chattery and nearly impossible to drive on the street to one that is butter smooth. The disc can also make all the difference between a clutch that slips and burns up when the boost is turned up or the nitrous hit, to one that grabs and holds the power.

Read Part One about how the clutch pressure plate works Here!


 

[Read the rest of this article...]

Posted in: Magazine, Tech
Page 1 of 2First   Previous   [1]  2  Next   Last   

MotoIQ Proudly Presents Our Partners:



© 2018 MotoIQ.com