Wilwood’s New Swing Mount Pedal and Triple Master Cylinder Assemblies

Wilwood's New Swing Mount Pedal and Triple Master Cylinder Assemblies

 
If you are building a racecar, street rod or Pro-Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

 

 

The Reverse Mount Pedal Assembly positions the master cylinders inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders outside of the firewall.

 

 

Both units feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. The frame and the pedal arms are Platinum-E coated for protection and an attractive appearance. The pedal pads are of a special adjustable lightweight design that allows fine-tuning of the pedal location and clearance. Also included with the assembly of your choice are the mounting studs, hardware, clevis and pivot pin balance bar that are designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The units provide a 6.25 to 1 ratio on both clutch and brake pedal.

 

For more information contact 

Wilwood Engineering at (805) 388-1188 or visit our website at  www.wilwood.com or customerreply@wilwood.com

 

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*