26

Project Nissan 370Z - Keeping it cool with a CSF radiator, HPS Hoses and a Nissan Motorsports Oil Cooler

By Mike Kojima

 

The Nissan 370Z is a notoriously under cooled car.  It has a pretty bad reputation for easily going into overheat limp mode very quickly under track conditions and sometimes even on the street during normal driving in extremely hot conditions.  Nissan knows about the problem - 370Z press cars are fitted with oil coolers and diff coolers.  Probably Nissan does not want to add to the price of the car and instead relies on cheaper electronic nannies like limp mode to control the engine's and driveline's temps.

That was not going to cut it on our car.  During track use our oil temp and coolant temps would start to get really hot in about two laps, hot enough to where we would have to slow down to avoid limp mode.  This was completely unacceptable as we actually use our project cars on track, so we had to improve cooling enough to where we could drive the car hard enough to enjoy it.

 

With the overheating issues that plague the 370Z you would figure there would be multiple radiator options, but CSF is the only company supplying a drop-in high performance upgrade for the 370Z. The stock Nissan design is an odd one.  The AC condenser and the radiator itself are a one piece unit.  This was probably done to save costs but it makes upgrading the radiator difficult.  It is also difficult to remove the A/C for racing.  The CSF racing radiator is a two piece design where the AC condenser is larger than stock and separate from the radiator and can be removed for racing.  There is a bigger gap between the condenser and radiator to help evacuate hot condenser air before it hits the radiator. These features help the A/C work more effectively. The radiator and condenser are all TIG welded aluminum vs. the plastic and aluminum with bonded joints that the stocker uses.  All brackets and fittings are not cheap stampings but CNC machined from billet.  The CSF radiator is also a direct drop in replacement.

 

The radiator core itself is 32mm thick vs the stock 15mm, that's more than twice the thickness!  The tube design is called a B-Tube.  This exchanges heat 15% more effectively than the traditional oval shaped tube and is the same sort of tube used in the GT-R radiator.  A strong aluminum drain plug is used and the radiator employs a standard SAE cap.  A CSF radiator also has a 40% higher burst strength than stock.  Finally the radiator end tanks are hand polished for nice looks!

 

The condenser lines are all bent to match the stock parts for an easy installation.

 

Our test track would be the Streets of Willow during a track event put on by the team at K.R.O.P.S. (Keep Racing Off Public Streets).   Lucky for us the desert weather did not disappoint and gave us the chance to collect valuable data on how the radiator would stand up to on-track abuse.  

Page 1 of 6 Next Page
Bookmark and Share
Comments
Dusty Duster
Dusty Dusterlink
Wednesday, September 26, 2012 7:15 AM
I noticed you replaced your coolant with the "standard" green antifreeze. There is much debate as to whether or not you should put the green stuff in a system originally designed for orange/red/pink coolant. What are your thoughts on this?
Protodad
Protodadlink
Wednesday, September 26, 2012 7:17 AM
Great to see some local tracks represented here.

Any chance PTCC will make an appearance at Willow Springs in the future?
clintfocus
clintfocuslink
Wednesday, September 26, 2012 12:42 PM
well the stock coolent was blue(first time i saw that) and the coolent we put in was the 50/50 premix yellowish/greenish that says is compatible for all colors. Maybe mike will chime in on the topic
Der Bruce
Der Brucelink
Wednesday, September 26, 2012 1:19 PM
Clint - All props to wrenching so hardcore on all your stuff! Will you be looking at the newer Focus for a new time attack platform, out of curiosity? I hear that ST is a good start :-)
jeffball610
jeffball610link
Thursday, September 27, 2012 8:55 AM
I'm actually amazed that someone took the effort to change the radiator at the track. It provides more consistent data for testing even though the track temp rose.
However, I'm unimpressed with the oil lines Nissan uses for that oil cooler. It doesn't seem like a clean install for a "factory" sponsored part. I'm also not a fan of red/blue AN fittings. Just my opinion. I'm sure they work great. There are several Vegas residents that get limp mode on their 370Z after less than 30 minutes of light street driving and an oil cooler is a must.
clintfocus
clintfocuslink
Thursday, September 27, 2012 12:14 PM
how you want to run the Lines is really up to you for the oil cooler, so i mean if you wanted a more "tucked" or "clean" install of the lines that is your choice.
spdracerut
spdracerutlink
Thursday, September 27, 2012 9:07 PM
@Jeff, I changed my radiator at the track on Project S2k :) You can read all about it!
czubaka
czubakalink
Wednesday, October 03, 2012 7:53 PM
I have a similar question to Dusty's. What about using a pink coolant in a system originally designed for the green stuff? I know you can't mix the two (usually).
clintfocus
clintfocuslink
Thursday, October 04, 2012 3:56 AM
i personally am unaware of the difference in function between different color coolants. Hopefully someone chimes in from the staff with a little more insight
Post Comment Login or register to post a comment.

MotoIQ Proudly Presents Our Sponsors:

© 2014 MotoIQ.com