Link Engine Management

EXHILARATION STARTS HERE

Link Engine Management was established over 25 years ago by a passionate group of engineers who set out to develop the world’s best race technology. The vision was to put power, reliability and performance in the hands of drivers and teams, and to push technology as far as possible. Since then, Link has become a world leader in Engine Management Technology, selling products in over 65 countries through a dealer network of over 1,000 companies. Link Engine Management and its dealers around the world are experts in horsepower and will assist you in unleashing the full potential of your build.

Not only does Link Engine Management offer the world’s largest range of PlugIn ECUs which connect directly to factory harnesses with no major rewiring required, but also an extensive range of WireIn ECUs with many motorsport features for race, drift and time attack. Link's engine management products give users advanced tuning features such as "quick fuel" tuning and stunning knock control, coupled with powerful data logging and analysis solutions. Drivers all over the world rely on Link Engine Management from 2017 Formula Drift Champion James Dean to Australia’s top drag racers. Speed freaks all over the world are turning to the latest generation of ECU performance.

Featured Link Engine Management Products

G4+ THUNDER ECU

The Thunder is Link Engine Management's most advanced ECU yet! The Thunder is optimised for high end applications requiring maximum performance, flexibility and tuning control. The Thunder has more inputs, more outputs and more features than any other Link ECU.

Inputs:

  • 16 x Digital inputs
  • 4 x Temperature inputs
  • 16 x Analog inputs
  • 2 x Trigger inputs
  • 2 x Knock inputs

Outputs:

8 x Injection drives
8 x Ignition drivers
18 x Auxiliary outputs
+5V Sensor power supply
+8V Sensor power supply

Communications:

  • 2 x Thirty four pin, waterproof connectors
  • 2 x Twenty eight pin, waterproof connectors
  • 2 x CAN bus
  • 1x Serial (RS232) connection
  • 1x USB tuning connection

Miscellaneous:

  • 1 x 3 Axis Accelerometer – Lateral G (cornering), Longitudinal G (acceleration/braking), Vertical G.
  • 2 x K-type Onboard Thermocouple Inputs meaning high accuracy for high temperature situations like exhaust gas temperature sensing.
  • 2 x Digital Wideband Onboard 2 x E-throttle Controllers – for engines with two electronic throttle bodies.
  • 2 x Knock Control Inputs – monitor each bank on a V engine.
  • 16 x Digital Inputs – six can be differential reluctor (speed sensor) – ABS wheel speed sensors
  • 16 x Analogue Inputs – Temperature, Pressure, Position.
  • 18 x Auxiliary Outputs – Lights, solenoids, gauges, switches, relays etc.
  • Plus all other G4+ features including all Motorsport,Logging and CAN features, Peak and Hold and Digital Wideband.

     

G4+ XTREME ECU

The Xtreme is one of Link’s premium ECU’s with multiple inputs and outputs, Peak and Hold Injection, built in E-throttle and motorsport features such as Anti-lag and Traction Control. The Xtreme is optimised for all engines and setups including V8s, 4 Rotors and forced induction. If you want to gain an advantage over the competition, you’ll want a premium ECU like the Xtreme.

Inputs:

  • 10* x Digital inputs 
  • 4 x Temperature inputs
  • 11 x Analog inputs
  • 2 x Trigger inputs
  • 2 x Knock inputs

Outputs:

8 x Injection drives
8 x Ignition drivers
10 x Auxiliary outputs
+5V Sensor power supply
+8V Sensor power supply

*2 inputs required when using 2nd CAN Bus

 

Communications:

  • 2 x Thirty four pin, waterproof connectors
  • 1 x CAN bus
  • 1x Serial (RS232) connection
  • 1x USB tuning connection

Miscellaneous:

  • 8 Peak and Hold injection drives, user definable,
  • 10 amp peak, 3 amp hold.
  • Fully programmable E-throttle control complete with gear shift control and throttle blips.
  • CAN is user defined and supports two independent CAN modules.
  • Onboard Knock Control – support for two knock sensors wired directly to the ECU. No external amplifier required.
  • 30 General Purpose Tables and many dedicated tables.
  • 100 channels of logging.
  • 32Mb (4 MByte) of logging memory.
  • Built in trigger oscilloscope.
  • Mixture map, closed loop fuel correction.
  • OBDII output stream – send engine data to your tablet or phone using an OBDII to wifi/bluetooth adaptor (not included).

     

Explore Link's Extensive Product Line

 

  

 

Link Videos

 

Link G4 PC-Link Software Overview

 

How To Use PC-Link's Graphic View

 

How To Set Up 100 Logging Channels

 

G4+ Kurofune Adapter Loom ECU

 

Contact Information

Link Engine Management USA
7 West Square Lake Rd. Ste. 116
Bloomfield Hills, MI 483202

USA Phone Numbers
833 LINK ECU (833.546.5328)
Tech Support: 949.485.5023
Sales Support: 248.335.5803

USA Support Hours
EST 8:00am - 4:00pm Monday - Friday

 

Email
Tech Support: tech@linkecu.com
Sales: usasales@linkecu.com

 

New Zealand Phone Number
+64 3 348 8854

UK / Ireland Phone Number
01212867936

Australia Phone Numbers
Brisbane: (07) 3102 3224
Melbourne: (03) 9018 5294
Sydney: (02) 8011 4941

 

© 2018 MotoIQ.com